GeoSpring™ Hybrid Water Heater


Product Savings

  • Saves approximately $320 per year* - that's a savings of $3,200 in operating costs over a 10-year period
  • Reduces water heating expenses up to 62%* compared to a conventional 50-gallon tank water heater
  • Exceeds ENERGY STAR® standards with a rating of 2.35 energy factor

*Based on DOE test procedure and comparison of a 50-gallon standard electric tank water heater using 4881 kWh per year vs. the GE Hybrid water heater using 1856 kWh per year.


Available Rebates and Incentives

  • Additional incentives and/or utility  rebates may be available and vary by state
  • Consumers can go through their state Department of Revenue office for more information

*Some restrictions may apply

Click here for State and local incentives.




  • Offers easy replacement of standard electric water heater
  • Fits in similar footprint as a standard 50-gallon water heater with a height of 60-1/2" and a width of 21-3/4"
  • Uses existing water and electrical connections

eHeat™ Mode

Maximize your savings. In this mode, the water heater only operates the heat pump to heat the water. This is the most efficient mode, and allows for the greatest amount of savings.

Hybrid Mode

Use less energy while still experiencing fast recovery times. While the unit uses the heat pump as its primary means to heat the water, the standard electric elements may activate if a faster water temperature recovery time is needed. When the system determines that demand has been met, it will automatically revert back to using the heat pump only. This is the default mode the electric water heater is shipped in.

High Demand Mode

This is a great feature if you have guests spending the weekend and need increased amounts of hot water. High Demand mode operates very similar to Hybrid mode, but lets the system know in advance that it will be experiencing a larger water demand than usual. The water heater will be faster to react to temperature recovery by cycling on the heating elements sooner and for a longer duration of time.

Standard Electric Mode

This mode shuts off the heat pump and only uses the electric elements to heat the water, just like a standard electric water heater. Standard mode allows for operation in extremely cold situations (less than 45°F) where heat pump functionality would not be ideal.

Vacation Mode

With this setting, the system will drop the temperature set point to 50°F to save energy, while also preventing the water from freezing. Simply set how many days you will be away, with a minimum of 3 and a maximum of 90. The unit automatically heats the water to the previous set temperature the day before you are expected to return. Now you can experience a hot shower the moment you return home.

How It Works

A compressor and evaporator are integrated into the electric water heater unit and the evaporator draws in ambient heat from surrounding air using two variable speed fans. Condenser coils wrap the tank all the way to the bottom to transfer this heat into the tank and heat the water.

Air Filter

In the Hybrid, eHeat and High Demand modes, the water heater moves air through the system and out the back of the unit. An air filter is in place to protect the evaporator from accumulating dirt and dust. A clean air filter is important to get the highest efficiency. When the filter requires cleaning, a red indicator light above the "Filter" button will become illuminated, and an audible beep will sound. The filter can be wiped clean with a damp rag or rinsed with warm water.

? Click a feature or image hotspot to view details


Installing the GeoSpring™ Hybrid Water Heater

Read and understand the Installation & Owner's Manual before attempting to install or operate this water heater.

This video is intended to supplement the Owner's Manual, not replace it.

How it works




Item#: 79425



Unit Capacity 50 Gallons



Fuel Type


First-Hour Recovery

63 Gallons

Electronic Controls


   LCD Display

20 Character x 4 Line



   Service Diagnostics


Operating Modes




   Hybrid (Factory Default)


   High Demand


   Standard Electric


Vacation Setting

3 to 90 Days

Stop Cold Air


Demand Response Capable

Yes- 4 Settings

Water Temperature

100° to 140°F Range (120°F Factory Default)

   Precise Temperature

+/- 3°F

   Temperature Memory


Renewable Air Filter (Included)


Condensate Collector

Integrated w/Tubing Included

(Condensate tube must be directed into a drain below 36" from floor, or a condensate drain pump (not included) is required.)



Color Appearance

Silver Metallic



Energy Factor

2.35 in Hybrid Mode

Electrical Power Required

240V/208V (L1, L2, Ground), 60 Hz

Electrical Circuit Required

Dedicated 30 Amp Min.

Electrical Consumption - Upper Element

4,500 Watts - Maximum Heating

550 Watts - Minimum Heating

Electrical Consumption - Lower Element

4,500 Watts - Maximum Heating

550 Watts - Minimum Heating

Electrical Consumption Standby

2.0 Watts

Operating Air Temperature Range:

   eHeat, Hybrid and

   High Demand Modes

45° to 120°F

Operating Air Temperature Range:

   Standard Electric

32° to 150°F

Operating Water Pressure

20-125 PSI



Limited 1-Year

(See Written Warranty for Details)

Parts & Labor

Limited 10-Year

(See Written Warranty for Details)

2nd-10th Year Parts Only

Back to top