Close

Easy2DIY

LIQUID NAILS® Clear Small Projects Silicone Adhesive

Buy Now

Features

Clear Adhesive

Permanent

Resealable Cap

Waterproof

Fast-Bonding

? Click a feature or image hotspot to view details

Application Tips

APPLYING THE PRODUCT
General application:  Apply a bead of adhesive to the material being bonded and position immediately. For faster setting or uneven surfaces, pull materials apart right after pressing together and allow adhesive to air dry for 5 to 10 minutes before pressing back.

For fabric and canvas:  Apply a bead of adhesive to fabric/canvas. Work wet adhesive into fibers. Press surfaces together. Remove any excess adhesive. Keep clamped or pressed together for 24 hours.

For countertops, carpets and flooring:  Apply a bead of adhesive as close to the center of the material as possible. Press surface down and apply pressure from the center out to the edges. Remove any excess adhesive. Carefully pull materials apart and allow to vent for 2 to 3 minutes. Reapply from the center to the edges. Clamp or place weight on materials for 24 hours.

For porcelain and ceramics:  Apply a bead of adhesive to one surface; press into place. Remove any excess adhesive. Pull materials apart and vent for 2 to 3 minutes. Reapply materials and clamp together for 24 hours. Do not use for 48 hours.

For ceramic tile:  Apply a bead of adhesive to the back of the tile. Press tile into place. Remove any excess adhesive. Remove tile and vent for 2 to 3 minutes, then reapply tile and brace if necessary.

CLEAN-UP
For best results, use LIQUID NAILS™ Adhesive & Caulk Remover or mineral spirits.

Back to top

Application Photos

Zoom
read more

General Application

Apply a bead of adhesive to the material being bonded and position immediately.

General Application
General Application Con't.
For Porcelain and Ceramics
For Fabric and Canvas
<
>

Specs

RECOMMENDED FOR bonding all common building materials, including:

  • Wood
  • Metal
  • Concrete
  • Fiberglass
  • Painted surfaces
  • Vinyl
  • Vinyl cove base
  • Porcelain

LN-207 can be used for a variety of applications that include:

  • House numbers
  • Carpets
  • Countertops
  • Floor tile
  • Moldings
  • Canvas/fabrics

NOT RECOMMENDED FOR for windows, wood flooring, tubs/sinks, aquariums or ceiling applications.

TECHNICAL INFORMATION

Base: Silicone Pre-polymer
Type: Moisture-curing
Color: Translucent clear
Appearance: Smooth gel
Application Temperature: -35° to 140° F
(-37° to 60° C)
Service Temperature: -80° to 350° F
(-62° to 177° C)
Adhesion: Excellent to most
common substrates
Consistency: Squeeze tube grade
Bridging Ability: Very good
Extrudability: Very good
Shear Strength (in psi to wood):
24 hours – 85 psi
48 hours – 106 psi
Peel Strength (in pli, canvas to canvas, T-peel):
24 hours – 12.0 pli
1 week – 13.9 pli
Peel Strength (in pli, 180 after one week cure time):
Aluminum – 11.5 pli
ABS Plastic – 20.5 pli
Glass – 20.1 pli
Durability: Excellent
Flexibility: Excellent
Water Resistance: Excellent
Exterior Weathering: Excellent
Accelerated Aging (Q-UV Weatherometer):
No change in 500 hrs.
Shore A Hardness: 27
Cure Rate (24 hrs): 3 mm
Freeze-Thaw Stable: Stable through 5 cycles
Bleed: None
Staining: Do not use on marble or granite
Odor: Mild
Skin Time: 9 minutes
Tack Free Time: 20 minutes
Open Time: 10-15 minutes
Paintability: Not paintable
Weight Per Gallon: 8.6 pounds (3.2 kg)
Viscosity: 290,000 CPS
Volatiles: <5%
Solids: >95%
Flammability: Non-flammable
Flash Point: Not applicable
Shelf Life: 12 months from date of purchase
MAX VOC: 46 g/L

Back to top