Surface Preparation:
Surfaces must be clean, dry and structurally sound.

Product Application:
Cut nozzle at a 45° angle to desired size. Puncture inner seal with nail or wire and continue as directed below.

Cabinets and countertops:
Apply a 1/4" bead to contact areas on the back of cabinets or counter tops. Press firmly into place. Mechanical fasteners must also be used for installing wall cabinets.

Materials to furring strips or studs:
Apply zigzag 1/4" bead to each strip or stud to be covered by panel. Position panel so edges meet at stud center; only severely warped materials require finishing nails at top and bottom.

Decks:
Apply zigzag 1/4" bead to joists. Position planks and secure with mechanical fasteners.

Clean-up:
Use mineral spirits or an adhesive remover.

Recommended For:
Bonding common building materials (concrete, lumber, etc.) to:

• Plywood and waferboard
• Drywall
• Tileboard
• Treated Lumber
• Brick Veneers
• Exterior Foamboard (when applied below 90°F)

Technical Information:

Base: Synthetic rubber & resin
Type: Solvent
Color: Tan
Appearance: Smooth
Application Temperature:  40° to 100° F (5° to 38° C)
Service Temperature:  -20° to 140° F (-29° to 60° C)
Adhesion:  Excellent
Consistency:  Short buttery
Bridging Ability:  Excellent
Extrudability:  Easy
Shear Strength:
• 24 hours – 225 psi
• 48 hours – 300 psi
• 7 days – >425 psi
Durability:  Excellent; 20 year life
Flexibility:  Excellent
Water Resistance: Excellent
Exterior Weathering: Very good; adhesive not recommended for direct exposure to sunlight
Staining:  May stain marble
Odor: Mild solvent
Working Time:  10 minutes
Weight Per Gallon: 9.4 pounds (1.12 kg/l)
Viscosity:  230,000 CPS
Volatiles:  35%
Solids:  65%
Flammability:   Extremely flammable; nonflammable when dry
Flash Point:  1°F (-17°C)
Coverage:
• 30 lineal ft. using 1/4" bead for 10 fl.oz.;
• 85 lineal ft. using 1/4" bead for 28 fl.oz.
Shelf Life: 12 months from date of purchase
Specifications:  Exceeds ASTM C-557
MAX VOC:  401 GPL