Designed for children 18 months to 5 years of age (50 lbs.), the Svan Lyft Booster Seat gives toddlers the boost they need to reach the family table at mealtime.
The Lyft features maximum adjustability, allowing the booster to be used with most kitchen and dining chairs. With a simple twist and press of the safety notch buttons, the Lyft's telescopic rods can be lengthened to fit a chair's backrest and its legs adjust to allow for a comfortable seat height and support of child's legs.
The Lyft comes with two fastening straps and features anti-slip feet to prevent the booster from tipping or sliding off the chair it is fixed to. Stay-down safety locks keep the Lyft's seat in place, and a 3-point harness is included to keep little ones safely seated during meals.
The Lyft's backrest is ergonomically designed to support the backs of small children. Additionally, the booster's seat is angled to ensure proper and comfortable seating during meals and the legs are adjustable to ensure the child's legs are supported.
The Lyft is extremely light weight and folds compactly for storage and travel. Thanks to the convenient carry bag (included), you can take the booster to grandma's house for the weekend or to your favorite restaurant for a family meal.
With its combined beechwood and metal finishes, this stylish booster marries traditional and modern design, making it a perfect fit for any home.
The Lyft's smooth polished surfaces are easy to clean, so even the toughest food and drink spills can be removed effortlessly. Simply wipe down the booster with a damp cloth and be sure to dry it completely.
18.2 x 13.78 x 14 inches (46.23 x 35 x 35.56 cm)
5.07 lbs (2.3 kg)
Beachwood with lead-free finish
Aluminum and Plastic
Wipe with damp cloth. Be sure to dry thoroughly.
Click here to download the Svan Lyft User Manual.
Place the Booster Seat on a suitable chair so that both Legs are resting fully on the chair's seat and the upper End Pieces connect firmly to the chair's back.
Adjust Booster Seat's Telescopic Rods so that the booster's Legs rest flat onto the chair seat and the End Pieces connect firmly to the chair's back.
To adjust the length of the Telescopic Rods:
Press the safety notch and pull the Rod up or down until it locks in place in the required position. Repeat for the other Telescopic Rod.
To adjust the Booster Seat's seat height, press the two safety notches simultaneously at the bottom end of the Legs (located on opposite sides of the Leg). Move the Leg up or down until it locks in place in the required position. Repeat for the other leg.
Fold up the Seat until the Stay-Down Safety Lock engages with an audible "click." Adjust the length of the lower Fastening Strap and fasten securely to the seat of the chair by engaging the buckle.
Note: Each Fastening Strap has its own adjustable buckle so that the length of each can be individually adjusted. Make sure that the Fastening Straps aren't twisted or caught in some way during the assembly, and that the buckle does not cover the edge of the chair (see image above).
Adjust the Fastening Strap to the required length. Take the Fastening Strap around the back of the chair and fasten securely.
Make sure that the Booster Seat is securely fastened on the chair at every point, that it is secure in its position and adjust the straps further if necessary.
Be sure to check that:
Seat the child in the booster seat. Two strap will come around child's waist and the third will come up between child's legs. Fasten buckle and ensure that it is engaged securely with an audible "click."
The harness should be fitted to ensure that it is closely fitting but does not restrict movement. In order to prevent a too tight fit or to stop the infant from sliding into an unsuitable position, ensure that you can comfortably fit one or two fingers between the child and the belt. The child's back must touch the back of the seat to ensure that the belt is not too loose. Also make sure the belt isn't twisted or caught, as this could cause injury.
To unfasten the harness press the safety button and undo the buckle.
How to fold the Booster Seat for storage and/or travel: