Loading

Graco Children's Products - Graco SimpleSwitch™ Highchair Product Demo

Graco SimpleSwitch™ Highchair Intro

See Flash demo for product images and multimedia.

 

Graco SimpleSwitch™ Highchair Features

  • View 1

    • 2-in-1 Design:

      Converts to booster when your child is ready.

    • 3-position Reclining Seat:

      Helps position baby for a comfortable feeding. 

    • Machine Washable Seat Pad:

      Makes clean up easy.

    • One Hand Removable Tray:

      Removable tray with dishwasher-safe, pull-out insert makes clean up quick and hassle-free.

    • Built in Leg Storage:

      Keep parts together when you transition to booster mode.

    • Convertible 3 & 5-Point Harness:

      Keeps baby secured.

 

Graco SimpleSwitch™ Highchair Video

See Flash demo for product images and multimedia.

 

Graco SimpleSwitch™ Highchair Gallery

See Flash demo for product images and multimedia.

 

Graco SimpleSwitch™ Highchair Instructions

  • To Attach Front Legs
    • Grab leg with collar and insert it firmly into openings in footrest as shown.
    • Line up buttons and guide with channels in opening.
    • Push front legs up into footrest until the collars stop them.
  • To Attach Front Legs
    • Align arrows on front legs with the arrow on the booster base as shown.
    • Insert front leg assembly into bottom of seat as shown.
  • To Attach Rear Legs
    • Insert rear legs into bottom of seat as shown.
  • To Remove Legs
    • To remove front legs, press button on side of seat and pull leg out a little.
    • NOTE: DO NOT pull leg out completely until you have pressed button on the other side of seat to release the other leg.
    • To remove rear legs, press buttons on side of seat as shown.
  • Seat Back
    • Insert seat back into base of infant seat.
    • NOTE: Make sure straps DO NOT get caught between seat bottom and back.
    • Squeeze handle to allow rods to drop into holes.
    • Once connected, flip two pieces over, and insert rods through seat hinge past the tabs.
  • Attaching Seat Pad
    • Insert straps on back of seat pad into slots in seat back as shown.
    • Pull waist straps through openings in seat pad.
    • Pull shoulder straps and crotch strap through openings in seat pad.
  • Attaching Seat Pad
    • Wrap seat pad over the top of the infant seat.
    • Make sure recline handle is sticking out the hole in the seat pad.
  • Attaching Seat Pad
    • Hook seat pad onto side of seat back as shown. Repeat on other side.
    • Fasten elastic straps on seat pad to hooks under infant seat as shown.
  • Head support (On certain models)
    • Place head support on top of seat pad.
    • Pull waist straps through openings in head support.
    • Pull shoulder straps through openings in head support.
  • To Use Tray
    • Squeeze release levers on each side of tray, place tray on seat, and snap into side tray locks.
    • To release squeeze release levers on each side of tray and lift off.
    • To release push button on front of tray.
  • Tray Cover
    • Dishwasher safe.
    • Attach tray cover by pushing it down on the tray.
    • To remove pull up on the back of the tray.
  • To Recline Seat
    • Squeeze handle on back of seat and push down or pull up to adjust.
    • There are 3 recline positions.
  • To Secure Child
    • Press to open harness.
  • To Secure Child
    • Use slide adjuster at shoulder and waist for further adjustment.
    • Repeat on other side.
    • When changing harness strap slots, MAKE SURE harness straps are going through same slots in seat pad and seat back.
    • The harness straps must go into slot that is even with or slightly above the shoulders. Avoid twisting straps.
  • Using as Feeding Booster
    • Slide 4 strap doors over leg holes in seat to access straps.
    • Pull straps out from compartments in bottom of seat.
    • Place feeding booster on a chair with no armrests and that has a back, ensuring that the straps are hanging freely.
    • Make sure that there are no extra seatpads or cushions on the chair that you are using with the booster.
  • Using as Feeding Booster
    • Wrap top straps around back of seat and secure clip. Tighten by pulling on the adjustment strap.
    • Wrap bottom straps around base of seat and secure clip under the seat.
    • Tighten by pulling on the loose straps.
    • CHECK to make sure feeding booster is securely attached by moving from side to side.
    • Ensure the feeding booster is attached correctly by pulling up on it.
    • If you want to use trays, follow instructions on page 19-20.
  • To Remove Feeding Booster from Chair
    • Unfasten clips on bottom of seat.
    • Unfasten clips from back of seat.
    • Remove feeding booster seat from 43 seat.
    • Fold and store straps in compartments on bottom of feeding booster as shown.
    • Slide 4 strap doors over strap compartments to store straps.
    • In order to use in highchair mode, MAKE SURE the compartment door is closed before reattaching the legs.
  • To Store Legs
    • To remove front legs, press button on side of seat and pull leg out a little.
    • NOTE: DO NOT pull leg out completely until you have pressed button on the other side of seat to release the other leg.
    • To remove rear legs, press buttons on side of seat as shown.
    • Insert rear legs into back of footrest as shown.

 

Graco SimpleSwitch™ Highchair Specs

  • Specification 1

    •  

    •  

    •  

  • Specification 2

    •  

    •  

    •  

  • Specification 3

    • Manufacturer Suggested Age:

      Material:
      Care and Cleaning:





      Safety and Security:
      Maximum Weight Capacity:
      Dimensions: Height:

      Product Weight:

       

    • Highchair up to 3 years of age and booster up to 60 lbs
      Metal, Plastic
      TO CLEAN HIGHCHAIR FRAME, use only household soap and warm water. NO BLEACH or detergent. TO CLEAN REMOVABLE SEAT COVER use only household soap and warm water. NO BLEACH or detergent.
      5-Point Harness
      Highchair: 37 lbs, Feeding Booster: 60 lbs
      Height: 43", Width: 23.5", Depth - Front to Back: 28.5"
      17 lbs
       

 

Easy2 Technologies