
In-Sink-Erator - InSinkErator - Invite™ H-770 Product Demo
InSinkErator - Invite™ H-770 Instructions
- Introduction
- In-Sink-Erator Instant Hot Water Dispenser
- Filter (optional)
- On Demand
- Tools
- Cordless Drill
- Phillips and flat head screwdrivers
- Adjustable wrench
- Pliers
- Utility knife
- Pencil
- Ruler
- Tube bender
- Tube cutter
- 3/8" compression fitting
- Pan to catch drips
- Cord ties or wraps for tubing, cabling
- Level
- Planning
- Grounded Electric Outlet
- Cold-Water Plumbing Connection
- Call Plumber, Electrician
- Turn Off Water
- Unpack
- Straighten Copper Tubing
- Faucet
- Seal on Dispenser/Value Body
- Surround Sink Mounting Hole
- Faucet
- Work From Under the Sink
- Mount Plate on Stud
- Attach Hex or Wing Nut
- Partially Tighten With Tool
- Hot Water Tank
- Mount Vertically and Level
- Leave Room for Connections, Drainage
- Select Location
- Mark Holes With Pencil
- Drill (2) 1.8" Holes
- Hang Tank
- Tighten Screws With 1/2 Turn Clockwise
- Cold Water Connection
- Connect Input Filter Tube
- Slide Nut, Female Over Tube
- Push in Tube Insert
- Tube into Fitting, Use a 3/8" Compression Fitting
- Tighten
- Plumbing Connections
- Variations in Models
- Avoid Storage Area
- Avoid Sharp Corners
- Cut Perpendicular to the Tube to Insure a Proper Seal
- Insert into Quick-Connects
- Plumbing Connections
- 3/8" Poly Tubing to Inlet
- 3/8" Poly Tubing to Outlet
- Tank Filling & Plug-In
- Turn on Water
- Dispenser Handle to HOT
- Flush for 3 Minutes
- Watertight
- Plug-in Tank
- 10 to 15 Minutes to Reach Temperature
- Temperature Adjustment
- Adjust Thermostate to Desired Temperature
