Loading

Rust-Oleum - Stain Additive For Premium Clear Product Demo

Stain Additive For Premium Clear Intro

See Flash demo for product images and multimedia.

 

Stain Additive For Premium Clear Features

  • View 1

    • 100% Satisfaction Guarantee:
    • Easy One Coat System:
    • High Performance Finish with a Premium Professional Look:
    • No Peel Promise:

 

Stain Additive For Premium Clear Product Colors

See Flash demo for product images and multimedia.

 

Stain Additive For Premium Clear Mixing

  • Prepare the roller cover

    First insert the roller cover into the plastic bag provided with the kit. 

  • Secure the bottom of the roller cover

    Secure the bottom of the bag to the roller cover with a rubber band. While holding the roller cover in one hand, with the other hand slightly twist the plastic bag around the roller cover. Use another rubber band to secure the other end of the bag. Use a third rubber band to secure the center of the bag to the roller cover. None of the rubber bands should be secured too tightly, twisting over only 2 or 3 times. If the bag is too tight, the creases on the roller cover will be visible on the floor.

  • Pour entire stain additive (Part C) into the base (Part B)

    Pour the entire stain additive (Part C) into the base (Part B) and stir thoroughly for 2 minutes. To activate the mixture, pour the entire activator (Part A) into the mixture and stir thoroughly for 2 minutes. If using the anti-slip additive (recommended), it should be added slowly and thoroughly mixed at this time. The activated coating must be used within 90 minutes after mixing.

 

Stain Additive For Premium Clear Application

  • Air, material, and surface temperatures

    Apply only when air, material, and surface temperatures are between 60-85ºF (15-29ºC) and the surface temperature is at least 5ºF (3ºC) above the dew point. The relative humidity should not be greater than 85%. The minimum floor temperature for painting is 55°F (13°C). Apply in the mid-afternoon or later when temperatures are declining and the surface to be coated is not in direct sunlight

  • Apply

    Pour a portion of the admixed material into a lined paint pan. Immediately begin to cut in the perimeter of the floor along the wall, or other areas where a roller cannot reach, using a brush or edger before beginning roller application. Use the prepared 3/8” nap roller cover on a 9” roller frame to apply an even coat .

 

Stain Additive For Premium Clear Clean Up

  • Tool Care

    When finished, wash tools and equipment with xylene or acetone. Clean up drips or spatters IMMEDIATELY with xylene or acetone as dried paint is very difficult to remove. Properly dispose of all soiled rags.

 

Stain Additive For Premium Clear Kit Includes

See Flash demo for product images and multimedia.

 

Easy2 Technologies