Loading

Barrette - ActiveYards Privacy Vinyl Fence Arrowwood Panel Product Demo

ActiveYards Privacy Vinyl Fence Arrowwood Panel Intro

See Flash demo for product images and multimedia.

 

ActiveYards Privacy Vinyl Fence Arrowwood Panel Features

  • View 1

    • Seclusion and Privacy:

      We know that privacy goes both ways. Whether you’re interested in hiding an ugly neighbor’s house from view or want to make sure that you’re protected from the eyes of the outside world, our fences can help you maintain your privacy and seclusion.
       

    • GlideLockTechnology:

      Unlike other types of fencing, our patent pending GlideLock technology helps lock every picket tightly in place without any gaps. This method provides added strength to your fence and helps it stand up to the elements.
       

    • Cambiun Technology:

      Our exclusive Cambium technology allows you to enjoy all of the aesthetic benefits of natural wood without the hassle of continued maintenance due to cracking, warping and fading.
       

    • Available Colors:

      Arrowwood Privacy Panel is available in: White, Sand, Wicker, and Cambium Cypress.

    • Variety of Accessories:

      Spruce up your Arrowwood Privacy Panel with a variety of accessories includuing: Post tops, Posts, and Gate Hardware.

 

ActiveYards Privacy Vinyl Fence Arrowwood Panel Gallery

See Flash demo for product images and multimedia.

 

ActiveYards Privacy Vinyl Fence Arrowwood Panel Instructions

  • Setup

    Step 1: Mark the fence location using string and line stakes.

    Step 2: Dig post holes 12" in diameter 36" deep. Use the Center to Center measurements of the fence model being installed for the Center to Center Post Distance. If a fence panel is being used that is less than the width of a full panel, or if posts are being used other than 5" in width, measure the width of the panel and add the width of one post, that will be the Center-to-Center post distance of the holes.

    Step 3: If frost line exceeds 30" dig hole to the appropriate depth and then add 6" of gravel for post drainage. Add concrete according to manufacturers instructions until a depth of 30" remains. Set post in hole ensuring it is plumb and level. Fill hole with concrete according to manufacturers instructions. Go to step 5.

    Step 4: If frost line does not exceed 30", insert 6" of gravel into bottom of both holes then set post in ground ensuring it is level. Ensure fififirst post is plumb and level and then add concrete according to manufacturers instructions.

  • Assembling the Boards

    Step 5: For Build-It-Yourself panel, insert aluminum into bottom rail, then insert bottom rail into bottom post route hole of fififirst post only.

    Step 6: Next, attach U-Channels to boards. If assembling Red Cedar panels, you must screw U-Channels
    to post fififirst and then add boards.

    Step 7: Insert boards into bottom rail ensuring U-Channels are on both ends.

    Step 8: Add the lattice insert over the top of the lattice. Place into the middle rail followed by the top rail.

  • Add the Posts (Not Included)

    Step 9: Finally add the completed assembly into the route holes of the first post.

    Step 10: Insert the completed fence panel into the route holes of the second
    fence post. Plumb and level the post and add concrete according to the manufacturers instructions.

    Step 11: Check to ensure the second Post is level , then measure panel plus add dimensions from center of 2nd post to center of next and dig the third post hole accordingly.

  • Final Step

    Step 12: Repeat process from steps 2 to 9 until all fence panels and posts have been installed.

    Step 13: Apply glue on inside rim of post caps then attach to posts.

 

ActiveYards Privacy Vinyl Fence Arrowwood Panel Specs

  • Specification 1

 

Easy2 Technologies