Rust-Oleum - Concrete Floor Coating Kit Product Demo

Concrete Floor Coating Kit Intro

See Flash demo for product images and multimedia.


Concrete Floor Coating Kit Features

  • View 1

    • Advanced Acrylic Technology:

      Creates a long-lasting finish.

    • Ready to use, self priming formula:

      Gets your project started and completed quickly and easily.

    • One coat coverage:

      Provides a smooth, even coat with one application.

    • Resistant to stains, peeling and fading:

      Durable and long-lasting.

    • Soap and water clean up:

      Creates a concrete surface that can be easily cleaned.

    • Resists chemicals, dirt and hot tires:

      Good for multiple areas of the house.


Concrete Floor Coating Kit Gallery

See Flash demo for product images and multimedia.


Concrete Floor Coating Kit Instructions

  • Step 1 - Surface Preparation

    Bare Concrete Surfaces: Remove grease, oil, salt and other contaminants with a heavy duty degreaser (sold separately) and follow directions accordingly. Scrub spots thoroughly with a stiff bristle brush or broom and wipe up excess cleaner. Rinse thoroughly with fresh water. Repeat as necessary to completely clean the surface. If necessary, use a wire brush or sander to remove any loose or unsound concrete or masonry. Use the enclosed Concrete Etch before applying Concrete Floor Coating to exterior surfaces only. Indoor concrete may be cleaned using a heavy duty degreaser (sold separately).

    Previously Painted, Stained or Sealed Concrete Surfaces: Use a wire brush to remove any loose or peeling paint, stain or sealer. To ensure proper adhesion, scuff sand the entire surface. Wash the entire floor with a heavy duty degreaser (sold separately) diluted as stated on the label, and scrub the surface using a stiff bristle brush or broom. Spot etch all exposed exterior concrete surfaces using the enclosed Concrete Etch. Rinse the floor thoroughly and allow to dry completely.

  • Step 2 - Application

    Use a brush or edger to trim the perimeter and hard-to-reach areas. Use a long handled roller and the included 1/2” nap roller cover to apply an even coat of Concrete Floor Coating onto the surface in 4’x 4’ sections. Maintain a wet edge to prevent lap marks and gloss differences.

  • Step 3 - Decorative Chips

    Toss the included decorative chips onto the wet paint film if desired. Chips can easily be scattered on the freshly coated surface to enhance the look of the floor and to hide imperfections in the surface.


Concrete Floor Coating Kit Specs

  • Specification 1

    • Kit Contains:

      • Concrete Floor Coating - 1 Gallon
      • Concrete Etch
      • Decorative Chips
      • Stir Stick
      • 9” Roller Cover
      • Protective Gloves
      • Instruction Sheet

      Other Supplies Needed:

      • Stiff Bristle Broom or Scrub Brush
      • 9” Roller Frame
      • 12” Paint Tray
      • Extension Pole

      Optional Supplies:

      • Heavy Duty Degreaser
      • Anti-Skid Additive

      Best For: Garages, Patios, Basements, Pool Decks and more

      Kit Coverage: 300-400 sq. ft.

      Color: Battleship Gray

      Walk-On Ready: 12-16 Hours

      Drive-On Ready: 7 Days

      Number of Coats Needed: 1

      Clean-Up: Soap and Water

      Application Conditions: Air Temperature Between 50-90°F (exterior application)



Concrete Floor Coating Kit New Long Copy

See Flash demo for product images and multimedia.


Easy2 Technologies