Loading

Barrette - ActiveYards Privacy Vinyl Fence Dogwood Panel Product Demo

ActiveYards Privacy Vinyl Fence Dogwood Panel Intro

See Flash demo for product images and multimedia.

 

ActiveYards Privacy Vinyl Fence Dogwood Panel Features

  • View 1

    • Seclusion and Privacy:

      We know that privacy goes both ways. Whether you’re interested in hiding an ugly neighbor’s house from view or want to make sure that you’re protected from the eyes of the outside world, our fences can help you maintain your privacy and seclusion.
       

    • GlideLock technology:

      Unlike other types of fencing, our patent pending GlideLock technology helps lock every picket tightly in place without any gaps. This method provides added strength to your fence and helps it stand up to the elements.
       

    • Natural Beauty:

      Our exclusive Cambium technology allows you to enjoy all of the aesthetic benefits of natural wood without the hassle of continued maintenance due to cracking, warping and fading.
       

    • Available Colors:

      Dogwood Privacy Panel is available in White, Sand, Wicker, and Cypress.

    • Available Heights:

      The Dogwood Privacy Panel is available in 4ft., 5ft., 6ft., and 8ft.

 

ActiveYards Privacy Vinyl Fence Dogwood Panel Gallery

See Flash demo for product images and multimedia.

 

ActiveYards Privacy Vinyl Fence Dogwood Panel Instructions

  • Post Installation

    Step 1: Mark the fence location using string and line stakes.

    Step 2: Dig post holes 12" in diameter 36" deep. Use the Center to Center
    measurements of the fence model being installed for the Center to Center
    Post Distance. If a fence panel is being used that is less than the width of a full panel, or if
    posts are being used other than 5" in width, measure the width of the panel
    and add the width of one post, that will be the Center-to-Center post distance of the holes.

    Step 3: If frost line exceeds 30" dig hole to the appropriate depth and
    6" of gravel for post drainage. Add concrete according to manufacturers
    instructions until a depth of 30" remains.
    Set post in hole ensuring it is plumb and level. Fill hole with
    according to manufacturers instructions. Go to step 5.

    Step 4: If frost line does not exceed 30", insert 6" of gravel into bottom of both holes
    then set post in ground ensuring it is level. Ensure fi rst post is plumb and
    level and then add concrete according to manufacturers instructions.

  • Panel Installation

    Step 5: For Build-It-Yourself panel, insert aluminum into bottom rail, then
    insert bottom rail into bottom post route hole and middle rail into
    middle post route hole of fi rst post only.

    Step 6: Next, attach U-Channels to boards (If applicable).
    If assembling Red Cedar panels, you must screw U-Channels
    to post fi rst and then add boards.

    Step 7: Insert pickets/boards from left to right into lower rail(s) ensuring U-Channels
    are on both ends.
    Note: Scallopped and Arched panels have pickets/boards that are numbered.
    Start from left side with the #1 picket/board first.

    Step 8: Insert top rail into left side of post route then guide over top of pickets/
    boards.

  • Post Level

    Step 9: Insert the completed fence panel into the route holes of the second
    fence post. Plumb and level the post and add concrete according to manufacturers instructions.

    Step 10: Check to ensure the second Post is level , then measure panel plus add dimensions
    from center of 2nd post to center of next and dig the third post hole accordingly.

  • Post Tops (Not Included)

    Step 11: Repeat process from steps 2 to 9 until all fence panels and posts have been installed.

    Step 12: Apply glue on inside rim of post caps then attach to posts.

 

ActiveYards Privacy Vinyl Fence Dogwood Panel Specs

  • Specification 1

 

Easy2 Technologies