Use Green Glue Noiseproofing Compound between two sheets of drywall to eliminate up to 90% of noise transmitted through walls.
Installing Green Glue Noiseproofing Compound is fast and simple, no special training required.
To ensure you get the best performance from your acoustic system, incorporate Green Glue Noiseproofing Sealant to seal gaps to ensure noise doesn't have a path to escape.
Green Glue products are safe for you and the environment.
Cut the end of the tube of Green Glue Noiseproofing Compound as shown.
Screw on nozzle and cut end leaving an opening of approximately 3/8".
Apply Green Glue Compound in random pattern across the entire back of the second sheet, leaving a 2" - 3" border free of compound around the edge to allow for handling.
Raise the board into position, press against the wall or ceiling, and fasten into place using appropriate screws. It must be hung and fastened in place within 15 minutes to prevent the compound from curing before it is installed.
Follow all appropriate local building codes regarding screw type and spacing.
Use Green Glue Noiseproofing Sealant to seal cracks and seams.
28 fluid ounces
28 fluid ounces
Two tubes of Green Glue Noiseproofing Compound per 4' x 8' drywall panel
Use approximately one tube of Green Glue Noiseproofing Sealant for every six tubes of compound
16 SF per tube at recommended ratio
40 - 80 LF per tube depending on bead size
30 days (to reach peak performance)
48 hours (to mud, tape wall)
Caulkings and Sealants
Surface Burning Characteristics
Green Glue Noiseproofing Compound Applied to Inorganic Reinforced Cement Board
Test and applied in three 3/8 in. beads 5 in. OC, Covering 6.3% of the exposed test sample area.
Listed in accordance with CAN/ULC-S102
Green Glue tested as applied in three 11.1 mm diameter beads, 127 mm OC covering 7.4% of the exposed test sample area.