Loading

Schiller Grounds Care, Inc. - Ryan® Renovaire® Product Demo

Ryan® Renovaire® Features

  • View 1

    • Weight Tray:

      Each weight tray is capable of holding up to 150 pounds for better penetration in heavily compacted soil.

    • 6-foot Aerating Width:

      6-foot aerating width at speeds up to 4 mph.

    • Lift Systems:

      Hydraulic cylinder standard. Unit shown with manual hydraulic pump accessory.

  • View 2

    • Tines Wheels:

      Independently mounted tine wheels allows turning while the tines are in the ground, setting a new standard in efficiency and quality.
       

    • Terrain-Hugging Tines:

      Each pair of tine wheels is independently mounted to the frame, allowing them to follow the contour of the turf.

    • Warranty:

      2 year limited warranty.

 

Ryan® Renovaire® Options

  • Specification 1

    • Tines

    •  

  • Specification 2

    • 515197*

      Tine, Coring 3/4” (19mm), Back Discharge, Thick Wall

      These tines are ideal for thorough aeration programs in the spring and fall.  Soil cores up to 4” long are removed with minimum surface disturbance letting in air, moisture and fertilizer to the root zone. The cores on the surface quickly disintegrate forming top dressing for an excellent seed bed.

      *Standard configuration

  • Specification 3

    • 515196

      Tine, Coring 1/2” (13mm), Back Discharge, Thick Wall

      These tines will not remove as much volume as the ¾” tines and can be used when compaction or thatch is not as severe. You still get the 4” long soil core, minimal surface disturbance and the same benefits as the ¾” tines.

  • Specification 4

    • 520404

      Tine, Spoon

      These tines are for turf building and fall renovating programs. These tines thoroughly open up the soil by penetrating deep in the ground and bringing up large amounts of soil, which then becomes top dressing.

  • Specification 5

    • Knives

    •  

  • Specification 6

    • 521155

      Deep Slicing Knife

      These knives slice 6” grooves in the turf.  The knives are for all season aeration and renovation programs.  Slicing knives are beneficial to turf grasses that produce stolons and/or rhizomes. By slicing the stolons and rhizomes, new mother plants are created that will send out new rhizomes and stolons with a vertical growth pattern.

  • Specification 7

    • 515193

      Shallow Slicing Knife

      These knives slice grooves a little over 4” in the turf.  These knives give the same benefits as the deep slicing knives plus, like the deep slicing knives, no surface clean up is required. These slicing knives are ideal for turf where immediate play is required.

 

Ryan® Renovaire® Specs

  • Specification 1


    • Unit

    •  

  • Specification 2

    • Power

      Lubrication

    • Tractor-draw

      Pressure grease fittings at pivot points

  • Specification 3

    • Aerating Wheel Axle

      Aerating Wheels

       
      Hitch

    • 1.25 in. (32 mm) diameter

      12, cast iron with sintered bushings; pressure lubrication fitting; grooved for mounting aerating tines on both sides; each wheel weighs 75 lb (34 kg)

      Clevis and Pin Type

  • Specification 4

    • Tines

    • 8 per wheel (96 total); standard one set 0.75 in. (19 mm) coring;
      wheels can be mounted with double set of tines, 16 per wheel (192 total)

  • Specification 5

    • Coring Depth

      Aerating Width

      Aeration Pattern

    • Up to 4 in. (102 mm)

      72 in. (1,829 mm)

      6 in. x 6 in. (152 mm x 152 mm) with single tines;
      3 in. x 3 in. (76 mm x 76 mm) with double tines

  • Specification 6

    • Productivity

      Holes per SqFt

    • 3 acres/hr (1.2 ha/hr) at 4 mph (6 km/hr)

      Up to 9 with single tines; up to 18 with double tines
       

  • Specification 7

    • Towing Speed

      Transport Tires

      Transport Lift

      Weight Tray

    • Up to 10 mph (16 km/hr)

      16 x 4.80-8, 6-ply

      Hydraulic cylinder

      Set of 6 included

  • Specification 8

    • Dimensions

    •  

  • Specification 9

    • Weight

      Width

      Length

      Height

    • 1,518 lb (689 kg)

      96 in. (2,438 mm)

      60 in. (1,524 mm)

      36 in. (914 mm)

  • Specification 10

    • Warranty

    •  

  • Specification 11

    • Warranty

    • 2 year limited warranty

 

Ryan® Renovaire® Gallery

See Flash demo for product images and multimedia.

 

Ryan® Renovaire® Accessories

  • Specification 1

    •  

      Optional Equipment

    •  

  • Specification 2

    • Manual hydraulic pump is available if towing vehicle does not have auxiliary hydraulics available.

 

Easy2 Technologies