Loading

In-Sink-Erator - InSinkErator - Invite™ H-770 Product Demo

InSinkErator - Invite™ H-770 Instructions

  • Introduction
    • In-Sink-Erator Instant Hot Water Dispenser
    • Filter (optional)
    • On Demand
  • Tools
    • Cordless Drill
    • Phillips and flat head screwdrivers
    • Adjustable wrench
    • Pliers
    • Utility knife
    • Pencil
    • Ruler
    • Tube bender
    • Tube cutter
    • 3/8" compression fitting
    • Pan to catch drips
    • Cord ties or wraps for tubing, cabling
    • Level
  • Planning
    • Grounded  Electric Outlet
    • Cold-Water Plumbing Connection
    • Call Plumber, Electrician
    • Turn Off Water
    • Unpack
    • Straighten Copper Tubing
  • Faucet
    • Seal on Dispenser/Value Body
    • Surround Sink Mounting Hole
  • Faucet
    • Work From Under the Sink
    • Mount Plate on Stud
    • Attach Hex or Wing Nut
    • Partially Tighten With Tool
  • Hot Water Tank
    • Mount Vertically and Level
    • Leave Room for Connections, Drainage
    • Select Location
    • Mark Holes With Pencil
    • Drill (2) 1.8" Holes
    • Hang Tank
    • Tighten Screws With 1/2 Turn Clockwise
  • Cold Water Connection
    • Connect Input Filter Tube
    • Slide Nut, Female Over Tube
    • Push in Tube Insert
    • Tube into Fitting, Use a 3/8" Compression Fitting
    • Tighten
  • Tank Filling & Plug-In
    • Turn on Water
    • Dispenser Handle to HOT
    • Flush for 3 Minutes
    • Watertight
    • Plug-in Tank
    • 10 to 15 Minutes to Reach Temperature
  • Temperature Adjustment
    • Adjust Thermostate to Desired Temperature

 

Easy2 Technologies