Loading

GE Lighting Solutions - Lumination LED Luminaires Product Demo

Lumination LED Luminaires Intro

See Flash demo for product images and multimedia.

 

Lumination LED Luminaires Features

  • View 1

    • High Powered LEDs:

      High Powered White LEDs provide high CRI and energy efficient lighting for general lighting applications.

    • Intrinsx Technology:

      Lumination LED Luminaires combine high-powered LEDs with Intrinsx technology to maximixe the performance, control and efficiency of every LED in this fixture.  This optical technology is embedded directly into the light guide, optimizing light distribution and optical efficiency up to 95%.

    • Diffused Lens:

      Diffused lens gives an evenly illuminated appearance.

    • Ultra-Thin Profile:

      Ultra-thin trim (0.5 in./14mm) allows installation in even very narrow ceiling plenums.
       

    • Easy Installation:

      Easy to install in the most common T-bar ceiling grids.
       

    • Integrated LED Driver:

      Integrated driver reduces installation complexity and allows for quicker installation vs. traditional fixtures.

 

Lumination LED Luminaires 360 View

See Flash demo for product images and multimedia.

 

Lumination LED Luminaires Gallery

See Flash demo for product images and multimedia.

 

Lumination LED Luminaires Application Images

See Flash demo for product images and multimedia.

 

Lumination LED Luminaires Instructions

  • Step 1

    Carefully unpack unit from its packaging. Properly inspect for defects before installing.  Wear work gloves to prevent dirt and oil from being transferred to the luminaire.

  • Step 2

    Insert LED Fixture into T-bar ceiling grid.  Unit should not be moving inside ceiling.  To ensure a consistent appearance, align fixtures in the same orientation throughout the ceiling patern.

  • Step 3

    If necessary, secure LED fixture to the ceiling grid with mounting brackets in all four corners.  Secure by screwing the mounting bracket into the LED fixture in the threaded hole provided.

  • Caution & Warning

    Do not perforate the integrity of the luminaire.  Only screw into the threaded mounting bracket holes.

    Risk of Fire. Do not install insulation within 3 inches of the top of the luminaire.

  • Step 4

    Remove electrical enclosure cover. Carefully remove knockout for AC line input wires.  Install listed electrical fittings in the knockout holes for wire protection.

  • Step 5

    Connect the AC line to the black (line) and white (neutral) input wires of the LED Driver using 18-14 AWG (0.82-2.08 mm2) twist-on wire connectors. Ground fixture by connecting green wire to green grounding screw. When connecting dimming controller, wires must run through a separate knockout hole equipped with an appropriate wire restraint or cable gland.

  • Step 6

    Screw electrical enclosure cover in place. Remove protective film from the face of the luminaire.

  • Optional-Step 7a--0-10V Dimming Installation

    Run wires from controller through a different knockout than the AC input wire. At output side of LED Driver, make appropriate connections using twist-on wire connectors. Follow lighting controller installation instructions.

  • Optional-Step 7b--DALI Lighting Controller Installation

    Run wires from controller through a different knockout than the AC input wire. At output side of LED Driver, make appropriate connections using twist-on wire connectors. Follow lighting controller installation instructions.

 

Lumination LED Luminaires Specs

  • Specification 1

    •  

    • ET22

    • ET14

    • ET24

  • Specification 2

    • Input Voltage

    • 120-277V, 347V

    • 120-277V, 347V

    • 120-277V

  • Specification 3

    • Input Power
      (complete system)

    • 50W

    • 47W

    • 54W

  • Specification 4

    • Input Frequency (Hz)

    • 50/60Hz

    • 50/60Hz

    • 50/60Hz

  • Specification 5

    • Input Current

    • 120V/50W - 425mA; 230V/50W - 230 mA; 277V/50W - 200mA

    • 120V/47W - 400mA; 230V/47W - 220mA; 277V/47W - 190mA

    • 120V/54W - 450mA; 230V/54W - 240mA; 277V/54W - 210mA

  • Specification 6

    • Power Factor

    • >0.9

    • >0.9

    • >0.9

  • Specification 7

    • Typical Lumen Output

    • 3220 @ 3000K; 3280 @ 3500K; 3550 @ 4000K

    • 3800-4000 Lm

    • 4200-4500 Lm

  • Specification 8

    • CCT

    • 3000K, 3500K, 4000K

    • 3000K, 3500K, 4000K

    • 3000K, 3500K, 4000K

  • Specification 9

    • Color Consistency

    • 4 Step Mac Adam Ellipse

    • 4 Step Mac Adam Ellipse

    • 4 Step Mac Adam Ellipse

  • Specification 10

    • CRI

    • 80

    • 80

    • 80

  • Specification 11

    • Control

    • 0-10V & DALI

    • 0-10V & DALI

    • 0-10V & DALI

  • Specification 12

    • THD

    • <20%

    •  

    •  

  • Specification 13

    • Life

    • L85 @ 50,000 hours

    • L82 @ 50,000 hours

    • L82 @ 50,000 hours

  • Specification 14

    • Dimensions

    • 23.4 x 23.4 x 2.5 inches (595 x 595 x 63 mm)

    • 47.8 x 11.8 2.5 inches (1184 x 284 x 63 mm)

    • 47.8 x 23.8 x 2.5 inches (1195 x 595 x63 mm)

  • Specification 15

    • Ceilings

    • 15/16" (24mm) & 9/16" (15mm) T-grid ceiling

    • 15/16" (24mm) & 9/16" (15mm) T-grid ceiling

    • 15/16" (24mm) & 9/16" (15mm) T-grid ceiling

  • Specification 16

    • Warranty

    • 5 year limited warranty

    • 5 year limited warranty

    • 5 year limited warranty

 

Easy2 Technologies