In-Sink-Erator - Involve™ H-Wave® Product Demo

Involve™ H-Wave® Instructions

• Introduction
  • In-Sink-Erator Instant Hot Water Dispenser
  • Filter (optional)
  • On Demand
• Tools
  • Cordless Drill
  • Phillips and flat head screwdrivers
  • Adjustable wrench
  • Pliers
  • Utility knife
  • Pencil
  • Ruler
  • Tube bender
  • Tube cutter
  • 3/8" compression fitting
  • Pan to catch drips
  • Cord ties or wraps for tubing, cabling
  • Level
• Planning
  • Grounded  Electric Outlet
  • Cold-Water Plumbing Connection
  • Call Plumber, Electrician
  • Turn Off Water
  • Unpack
  • Straighten Copper Tubing
• Faucet

  Seal on Dispenser/Value Body

  Surround Sink Mounting Hole

  Dimensions:

  Hole Diameter: 1-1/2"

  Rubber Washer: 1-5/8"

  Small Steel Washer: 1-5/8"

• Faucet
  • Work From Under the Sink
  • Mount Plate on Stud
  • Attach Hex or Wing Nut
  • Partially Tighten With Tool
• Head & Filter Bracket
  • Easy Plumbing Connections
  • Easy Filter Cartridge Replacement
  • Mark Mounting Hole Locations
  • Attach Bracket
  • Attach 6" Discharge Tube
• Plumbing Connections
  • Variations in Models
  • Avoid Storage Area
  • Avoid Sharp Corners
  • Cut Perpindicular to the Tube to Insure a Proper Seal
  • Insert into Quick-Connects
• Plumbing Connections
  • 3/8" Poly Tubing to Inlet
  • 3/8" Poly Tubing to Outlet
• Cold Water Connection
  • Connect Input Filter Tube
  • Slide Nut, Female Over Tube
  • Push in Tube Insert
  • Tube into Fitting, Use a 3/8" Compression Fitting
  • Tighten
• Tank Filling & Plug-In
  • Turn on Water
  • Dispenser Handle to HOT
  • Flush for 3 Minutes
  • Watertight
  • Plug-in Tank
  • 10 to 15 Minutes to Reach Temperature
• Temperature Adjustment
  • Adjust Thermostat to Desired Temperature