Barrette - Barrette Vinyl Privacy Screen Product Demo

Barrette Vinyl Privacy Screen Intro

Barrette Vinyl Privacy Screen Features

Barrette Vinyl Privacy Screen Gallery

Barrette Vinyl Privacy Screen Installation

• Before Starting Your Project

  Contact your local utilities, to locate underground utility lines.
  

• Includes

  Two #10 x 3/4" Self Drilling Screws

  One Tube PVC Cement

  Two Post Caps

  Privacy Screen

• Step 1

  Drill 3/16" pilot hole in bottom of post. Repeat for right post.

• Step 2

  Insert pole, into the screen post, leaving 18" to 24" exposed.

• Step 3

  Secure screen to the pole with #10 x 3/4" self drilling screw. Hand tighten to snug fit, BACK OFF 2 TURNS. (To allow for thermal expansion and contraction)

• Step 4

  Dig holes in the desired location 34" apart for the poles, 18" to 24" deep.

• Step 5

  For Temporary Setting: back fill holes with dirt.
  
  For Permanent Setting: fill holes with quick set concrete (purchased separately). Let concrete set.

• Step 6

  Place bead of PVC Cement glue around top perimeter of post.
  
  Place post cap on top of post and set.
  
  Repeat for right post.

Barrette Vinyl Privacy Screen Specs

• Specification 1

  • Sample

  • Model Number

  • Product Color

  • In-Stock/SOS

• Specification 2

  • 73003969

  • White

  • In-Stock/SOS

• Specification 3

  • 73004408

  • Wicker

  • SOS

• Specification 4

  • Check local Lowe's for
    In-Stock availability

  •  

  •  

  •