New Smart Sensor technology for a seamless and intuitive user experience:
Now supports Bluetooth® A2DP so you can stream music, podcasts, GPS navigation and more.
It's easy to quickly pause or play music by pressing the volume buttons simultaneously.
With dual-mic Audio IQ², two microphones separate your speech from up to 80 decibels of background noise, delivering clear voice quality to you and your listener.
Up to three times smaller than a typical Bluetooth adapter so it can stay in your laptop USB port for always-ready PC connectivity.
Whispered voice alerts announce:
WindSmart® technology has three layers of protection from wind noise:
• Stainless steel screens over both mics
• Acoustic fabrics over both mics
• Electronic filters in mic circuitry
Comfort-tested for extended wearing, the flexible materials and balanced lightweight design is also durable enough to withstand daily wear and tear.
Silicon gel eartips come in three sizes so you can find the best fit.
Powerful battery provides up to 6 hours of continuous talk time on one charge.
iPhone users can montior battery level onscreen (headset icon next to Bluetooth).
Install the software
Download and install the Plantronics software at plantronics.com/software
Once the software is installed, access the utility by selectingStart > Programs > Plantronics > Plantronics Control Panel.
Charge your headset
Fully charge the headset before using. The headset LED will be solid red while charging. When fully charged the LED turns off.
Note: To charge the headset with USB charging cable the PC must be on.
Activate the Bluetooth feature on your phone, then use the phone's settings to add/search/discover new Bluetooth devices.
With headset turned off, activate Bluetooth pairing mode by pressing the Power button. The LED flashes red/blue to indicate pairing mode.
Select “VoyagerPRO v2 ” from the list of Bluetooth devices shown on your phone.
If phone asks for a passcode, enter four zeros (0000). Some phones also ask to confirm headset connection after pairing.
Your Bluetooth adapter is pre-paired to your headset
Note: refer to the complete user guide located at plantronics.com/support if you need to re-pair.
1. Power on the headset
2. Insert the USB micro adapter directly into the laptop or PC
The LED will become solid blue to indicate the adapter is powered on and is connected to the headset.
Ensure a proper fit for optimal sound clarity and comfort
1. Guide the earloop behind your ear and place the headset so that the eartip rest comfortably in your ear.
2. For optimal voice clarity, pivot the boom to point toward the corner of your mouth.
The headset can be worn on either ear by adjusting the mic boom
1. Pivot the boom into an upright position.
2. Rotate the boom and speaker to the other side of the headset.
The headset comes with the medium eartip installed, but you can replace it with the optional small or large eartip provided
1. To remove the eartip, grip the eartip with your thumb and forefinger. Gently push it into the speaker housing and rotate it a quarter turn to the left. Gently lift the eartip away from the headset.
2. To attach a new eartip, align the tabs on the eartip with the slots on the speaker housing. Gently push the eartip into housing while turning it a quarter turn to the right. The eartip will stop rotating when properly attached.
Note: The optional foam eartip cover can be used for a more comfortable and stable fit.
Bluetooth Wireless Technology
Bluetooth Profiles USB Adapter
Service & Support
Bluetooth headset, mini USB adapter, carrying case, micro USB AC charger, micro USB charging cable, eartips, foam eartip covers, Quick Start Guide
Up to 6 hours
Up to 5 days/120 hours
Behind-the-ear, left/right wearing; boom microphone
Version 2.1 + Enhanced Data Rate (EDR)
Secure Simple Pairing (SSP)2
Profiles: Hands-free v1.5 (HFP), Headset v1.2 (HSP) and Advanced Audio Distribution (A2DP) to stream audio
Range: Up to 33 feet
HSP v1.2, A2DP v1.2, AVRCP v1.0
Wideband: up to 7,200 hz, echo cancellation, A2DP
Two noise-canceling microphones, 3mm
Active Digital Signal Processing (DSP)
Acoustic echo cancellation
Sidetone detection for noise conditions
Stainless steel windscreens
GORE™ acoustic vents
Electronic filter in mic circuitry
SoundGuard®: Sound leveling for listening comfort and acoustic limiting for protection against sounds above 118dBA
Supports initial pairing with Bluetooth phones
Supports an active connection with two Bluetooth devices
3.5V Li-ion polymer rechargeable
1.5 hours for full charge
Quick battery check
Last number redial (via phone)
Voice-activated dialing (via phone)
Talk time remaining, Mute status on/off, Bluetooth connection, low battery and recharge battery
1-Year limited warranty
Up to 33 feet (10 meters)
5V DC – 180 mA
32ºF - 104ºF (0-40ºC)
32ºF - 104ºF (0-40ºC)