Examples of VESA patterns
• 100mm x 100mm
• 400mm x 200mm
Your TV may vary.
10”- 32”, up to 50 lbs.
• ELFW-07
• LM30LP
• DC30LP
• BBSF
• DC30T
• DC37SJ
• ELPT-07
• LM30T
• BBST
• ELSJ-07
• LM30SJ
• DC30SJ
• BBOJ
• ELDJ-07
• LM30DJ
• DC30DJ
• BBTJ
• RSMSL
• RSMSS
• BSFMD
• DC30SW
• LM30SW
• BSFTS
• AISOA
• AISTA
• DS3DJ
• LM30LPW
• LM30SJW
• BBSS
• ELSFW-01
10” – 47”, up to 70 lbs.
• EL30-FW
• LM37LP
• DC37LP
• BBMF
• EL31-03
• LM37SJ
• BBMJ
• EL37DJ
• LM37DJ
• DC37DJ
• BBDJ
• BLSFD
• AIMTA
• AIMOA
• RSMML
• RSMMS
• LM37DJW
10” – 47”, up to 80 lbs.
• EL42DJ
• LM42DJ
• DC42DJ
• BBTDJ
This particular line is constructed using 2.5mm steel (the thickest in the industry).
This prevents sagging, bending, warping, breaking over the life of the mount.
We also apply a thick lead-free powder coating to prevent rust and corrosion.
• Integrated Bubble Level
• Extension Arms
• Mounting Hardware
Level Mount offers a full line of small and medium mounts to accommodate most TV wall mounting needs.
The Fixed position mounts offer a low-profile design.
The Pan/Tilt models have the flexibility of being mounted in a fixed position while allowing up to 15° of tilt and 30° pan to position your screen for optimal viewing.
The Full motion feature adds the ability to extend the TV 6.5” to 14” from the wall depending on model.
1. 24/7 Support
2. Protection Plan
3. Limited Lifetime Warranty
4. Commitment to Green
5. UL approval
6. On-line tutorials
7. Professional installation is available
DO NOT RETURN THIS PRODUCT TO THE STORE OR WEB SITE YOU PURCHASED FROM! IF YOU BELIEVE THIS MOUNT IS DEFECTIVE, HAS MISSING OR BROKEN PARTS, OR IF YOU ARE HAVING DIFFICULTY INSTALLING THIS MOUNT TO YOUR WALL OR FITTING YOUR TV, PLEASE CONTACT OUR COMPANY, LEVEL MOUNT, DIRECTLY.
Dial 1 888 229 1459 or email us at CustomerSupport@ElexaUSA.com any time of the day or night for a quick and efficient solution to your problem. Our trained Customer Service Department is open 24 hours a day, 7 days a week, every day of the year and is prepared to assist you in both English and Spanish. Please also visit our Web Site at www.LevelMount.com for assistance.
CAUTION:
Installer must make sure the Flat Panel Wall Mount is properly and securely attached and that appropriate fasteners are used. It is the responsibility of the installer to verify that the mount is anchored properly to the wall.
PLEASE NOTE:
THE MOUNT MUST BE ATTACHED TO WOOD STUDS OR TO PROPERLY INSTALLED ANCHORS IN CONCRETE. DO NOT MOUNT ONLY TO DRYWALL.
Before installing, check to make sure all parts of the mount are included. Make sure all screws and bolts are tightened before allowing Wall Mount to bear the full weight of the Flat Panel Display.
It is recommended that the center of the stud be used and that a nail be used to verify that a stud has been located.
Place the Wall Plate at the height you want to install the Flat Panel Wall Mount.
Mark the two or four holes you will be using.
Drill 1/8” (3mm) pilot holes.
The integrated Bubble level should be used to ensure a straight installation.
Please be sure to use all wall screws that are included in the package. You will need 2 screws for the Small mounts and 4 screws for the Medium mount.
Place the Wall Plate at the height you want to install the Flat Panel Wall Mount.
The integrated Bubble level should be used to ensure a straight installation.
Mark the two or four holes you will be using for concrete anchors. Drill holes for the concrete anchors using an electric drill with a masonry bit (15/32 inches or 12 mm). Drill into the wall at least as deep as the screw is long (2.5 inches). Insert the anchors into the holes and set them flush to the wall by tapping them in with a hammer.
Please be sure to use all wall screws and anchors that are included in the package. You will need 2 screws and anchors for the Small mounts and 4 screws and anchors for the Medium mount.
Select the bolts which most resemble the holes in the back of your Flat Panel. Thread the bolts carefully into your Flat Panel by hand to determine which provided mount hardware (correct diameter) is appropriate for installation.
CAUTION:
If you feel resistance, remove the bolt immediately and try another size! Next determine the correct length of the required bolt as described in the steps 6 and 7.
NOTE:
You will not use all of the hardware included.
The included adapter arms can be used for Flat Panel monitors with bolt patterns larger than 100 mm x 100 mm.
If you need to use the Adapter Arms, you must use all Adapter Arms in order for the Mount to properly hold your TV. It is recommended to measure the distance between the mounting holes on the back of your TV prior to attaching the Adapter Arms. The multiple hole pattern on the Adapter Arms make it easy to adjust to fit your unique television.
Attach the Adapter arms to the mount as shown.
After securing the Adapter arms to the mount, The arms will be attached to the TV using the appropriate screws, washers, and lockwashers as described in Steps 6 and 7.
NOTE: NEVER LAY YOUR TELEVISION FACE DOWN ON ITS GLASS. Laying the television down on the glass may cause permanent damage.
Flat Panel TVs with a flat back panel will require a shorter bolt. Thread the proper bolt through the appropriate Lock Washer, and Flat Washer, the adapter Arm and into the TV. Tighten bolts firmly with a Phillips screwdriver. Do not over tighten.
NOTE: NEVER LAY YOUR TELEVISION FACE DOWN ON ITS GLASS. Laying the television down on the glass may cause permanent damage.
Flat Panel TVs with a recessed back panel will require a longer bolt. Thread the proper bolt through the appropriate Lock Washer, and Flat Washer, the adapter Arm, spacer, and into the TV. Tighten bolts firmly with a Phillips screwdriver. Do not over tighten.
Slide the Monitor Bracket overtop of the wall plate until it locks into place.
The Quick-Lock™ will click into place securing the Monitor Bracket to the wall plate.
Use the simple Tilt Adjustment to tighten or loosen the joint. The Joint Tilt Knobs can also be used to loosen or tighten the joint.
The Level Mount Cord Management System keeps cords from dangling and becoming tangled.
Install Theft Deterrent Screw.
After installation, the TV can be fine tuned to level by simply rotating in a clockwise or counter-clockwise motion.
If resistance is felt, please stop and contact customer service.
Small
Medium
Dimensions
See Products on Website for Detailed Dimensions