Strategically placed to deliver a superior cut on undulating turf.
Provide independent power to each wheel for moving, stopping and turning.
For increased operator comfort
Raises / lowers deck quickly without locking into transport position, for continuous cutting without interruption and also doubles as a lift assist to aid in lifting to transport position.
Formed and welded 10-gauge steel with 7-gauge reinforcements and side skirts, with reinforced leading edge.
16cc Hydro-Gear® Pumps for speeds up to 12.5 mph; 4 mph reverse
For precision cutting height settings and overall deck leveling. Adjustable deck pitch for mulching, side discharge, and collection.
Bounces back from hard knocks and folds up for storage; no need to remove it.
Generac® Liquid Propane Delivery Engine for 50% reduction in ozone forming emissions.
Allows trimming on both sides without having to worry about where the discharge is going.
Flip up floor plate for convenient service access; minimizes downtime.
Split steel for strength and durability. Deep sheave machined pulleys require no belt guides to adjust!
Large 5” self-adjusting maintenance-free idler pulley.
Helps extend engine life because it is cleaner burning, reducing engine deposits.
Modular frame design provides replaceable caster supports and components.
Maintenance-free sealed bearing caster wheel with trash guard.
52 " SD | 61” SD | 61” RD | 72" SD | |
---|---|---|---|---|
Model Number | 942524J | 942509J | 942510J | 942511J |
Engine Make | Generac® Liquid Propane Delivery Engine | Generac® Liquid Propane Delivery Engine | Generac® Liquid Propane Delivery Engine | Generac® Liquid Propane Delivery Engine |
Engine Displacement | 992 cc (60.5 cu.in.) | 992 cc (60.5 cu. in.) | 992 cc (60.5 cu. in.) | 992 cc (60.5 cu. in.) |
Vehicle
Fuel Capacity
Two 33.5 lbs. Propane Tanks
Transmission
Hydrostatic drive with dual 16cc variable displacement pumps; wheel motors
Drive
Belt from engine to hydrostat input shafts; hydrostatic drive to wheels
Hydraulic Capacity
0.65 gal. (2.5 L) capacity; oil cooler
Brakes
Hydrostat provides dynamic breaking; disc-type parking brake
Steering
Lever-type steering controls independent power to each wheel for moving, shopping and turning
Seat
High-back, 4 point suspension seat with armrests, fore/aft adjustment; operator weight adjustment
Gauges and Controls
Hour meter; neutral safety switches; throttle; key switch; PTO clutch switch; steering and traction control arms; parking brake lever, deck lift assist foot pedal
Speed
Generac
0 - 12.5 (21.1 km/h) Forward; 0 - 4 (6.4 km/h) Reverse
Turning Radius
True zero-turning radius
Frame
7-gauge formed and welded steel
Cutting Decks
Deck Construction
DuraDeck™ with Extreme Discharge System. Welded 10-gauge steel with 7-gauge reinforcements and side skirts with reinforced leading edge, molded rubber discharge chute.
Deck Skirts & Anti-Scalp Rollers
7-gauge skirts with (7) 5 in. (127 mm) adjustable anti-scalp rollers front and rear
Spindles
Large top-mounted, 1-in. (25-mm)dia. shaft on maintenance-free ball bearings
Drive
Belt from engine to center spindle; split steel pulleys from center spindle to outboard spindles; 5.5-in. (140-mm) idler
Height of Cut
1.5 in. to 4.5 in. (38 mm to 127 mm) in .25 in. (6.4 mm) increments
Blades
61-in.- (3) 21 in. (53 cm); .25 in. (6.4 mm) thick
72-in. -(3) 25 in. (64 cm); .25 in. (6.4 mm) thick
Tires
Front
13 x 6.5-6 no-flat caster wheels
Rear
24 x 12.0-12 4-ply
61-in. Deck
24 x 12 - 12 4-Ply Turf Tread Drive Wheels
Productivity Rate / 8 Hours 61-in. Deck
Up to 35.52 acres (14.37 ha) at 9 mph (14.48 km/h)
Dimensions
Length
80 in. (2.03 m)
Width 61-in. Deck
72-in. (1.83-m) side-discharge 73 in. (1.9m) with chute down; 62 in. (1.6 m) with chute up
Overall Height
46.5 in. (1.2 m)