Jasco Products - GE Wireless Decoy Security Camera Product Demo
GE Wireless Decoy Security Camera Features
View 1
- Authentic Appearance:
This decoy camera's authentic appearance is designed to look like it's an operable component of a wireless surveillance system. It can be added to existing systems to increase security presence. Unique axis-swivel mount allows for surface or wall installation.
- Flashing Red LED:
Draws attention to the camera.
- Activate or Deactivate:
With convenient on/off switch.
- Requires 2 AAA Batteries:
Batteries last up to two years.
- Suitable for Indoor or Outdoor Use:
- Authentic Appearance:
GE Wireless Decoy Security Camera Category Video
GE Wireless Decoy Security Camera Product Video
GE Wireless Decoy Security Camera Instructions
- Decoy Security Camera
- Choosing a Camera Mounting Location
- Installing the Batteries
1. Separate the battery pack from the camera.
2. Remove the 4 screws located on the bottom of the battery pack.
3. Remove the camera mounting plate.
4. Install two new "AA" alkaline batteries according to the polarity markings.
5. Reinstall the mounting plate and screws. - Desktop Mount Installation
1. Place camera in desired location on a flat surface.
2. Set switch on camera to "ON" position.
3. Position camera front with flashing LED so that it is easily visible. - Wall Mount Installation
1. Select an ideal location. Using the template diagram, drill two 3/16” holes in the desired mounting location, and install the two wall anchors (included) into the holes, or screw directly into a wall stud. Make sure the screw heads protrude slightly from the wall to allow the camera to mount.
2. Secure the decoy camera to the wall by fitting the mounting slots on the back of the camera onto the screwheads in the wall.
3. Set ON/OFF switch on the battery to "ON" position. Slide the camera onto the locking pins of the battery pack.
4. Adjust antenna and camera angle as desired. - Troubleshooting
GE Wireless Decoy Security Camera Accessories
