Loading

Jasco Products - GE Wireless Security Camera with Handheld LCD, Color and Night Vision Product Demo

GE Wireless Security Camera with Handheld LCD, Color and Night Vision Features

  • View 1

    • Monitor with Ease:

      Audio detection and notification alerts you when sound is detected within a monitored area. Wirelessly transmits audio and video up to 200 feet.

    • Includes:

      One color wireless camera, a 2.5" LCD color monitor and 2 AC adapters. This system is perfect for monitoring any area of your home.

    • "Wi-Fi" Friendly:

      Won't interfere with your home wireless network.

    • Charging Cradle Included:
    • Night Vision Feature:

      For low or no light viewing.

 

GE Wireless Security Camera with Handheld LCD, Color and Night Vision Category Video

See Flash demo for product images and multimedia.

 

GE Wireless Security Camera with Handheld LCD, Color and Night Vision Product Video

See Flash demo for product images and multimedia.

 

GE Wireless Security Camera with Handheld LCD, Color and Night Vision Instructions

  • Wireless Color Camera with Portable LCD Monitor
  • Before You Install
  • Choosing a Camera Mounting Location

    The 45233 Wireless Color Camera can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or outdoor use. When choosing a mounting location, please be advised:

  • Choosing a Camera Mounting Location

    The 45233 Wireless Color Camera can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or outdoor use. When choosing a mounting location, please be advised:

  • Connecting the Camera to the Portable LCD Monitor

    Before beginning installation, we recommend that you temporarily “connect” the 45233 Color Wireless Camera to the 2.5” LCD Color Monitor to help familiarize yourself with the camera system and select the best location for installing the camera. The 45233 Camera and the 45236 Portable LCD monitor will connect wirelessly and automatically when both are powered on and within 200 ft. of each other (unobstructed view).

    1. Set the channel selection switch located on the underside of the camera housing. Select either 1 or 2 for the camera.

  • Connecting the Camera to the Portable LCD Monitor

    2. Similarly, set the slide switch located inside the battery compartment area of the Portable LCD monitor to match the channel used by the camera.

    3. Plug AC power adapter of the LCD monitor into the power jack at the rear of the charging base. This provides power to the Portable LDC monitor and also charges the LCD monitor’s battery.

    4. Turn on the LCD monitor by pressing the POWER button on the front of the monitor. Adjust the volume to the midpoint position.

    5. Be sure to charge the Portable LCD Monitor for at least 3 hours before removing from the charging cradle in order to sufficiently charge the battery.

    Battery Standby time: up to 5hrs., continuous operation up to 3 hrs.

  • Channel Selection - Manual Mode

    The wireless system can be set to operate in one of three modes: Manual, Auto or Stand-by.
    The desired operating mode can be selected using the buttons on the front panel of the LCD monitor.

    Manual Mode
    To select one of the two channels manually, press the ‘M’ (Manual) button on the front panel of the Monitor. The green LED will light for the corresponding channel. The Monitor will switch to a different channel (1 or 2) each time the MANUAL button is pressed. When you have selected the channel with the active camera, that video will appear on the monitor screen. Each camera must be assigned to a specifi c channel; both cameras cannot be on the same channel or the signals will cancel out.

  • Channel Selection - Multi-Camera Operation

    This wireless surveillance system is designed to work with up to 2 cameras. Additional cameras are sold separately.

    IMPORTANT: When using more than one camera, each camera must be assigned to a specific channel using the channel selection switch located on the underside of the camera housing.

    Select either 1 or 2 for each camera. Each camera must be assigned to a specific channel; both cameras cannot be on the same channel or the signals will cancel out. If using only one camera you can select either Ch 1 or Ch 2; whichever provides the best picture. The slide switch, located in the battery compartment of the LCD monitor, must be set to reflect the channels in use.

  • Channel Selection - Auto Mode (2 Camera Operation)
  • Stand-by Mode

     

  • Cycle Time Setting
  • Night Vision
  • Desktop Mount Installation

    1. Place camera in desired location on a fl at surface.

    2. Set Channel switch on camera to 1 or 2.

    3. Power ON the LCD monitor; connect AC adapter to camera.

    4. Select the channel (1 or 2) on the LCD monitor that corresponds to the camera channel setting.

    5. Adjust antenna and camera angle as needed for the clearest picture. Positioning the antenna upwards to improve sensitivity, and downwards to reduce sensitivity. Take care not to force the antennas past their lock positions.

  • Wall Mount Installation

    1. To simplify the wall mount process, you will find a custom wall mounting plate included with the mounting hardware.

    2. Select the ideal location. Using the supplied mount as a template, drill two 3/16” holes in the desired mounting location, and install the two wall anchors (included) into the holes, or screw directly into a wall stud. Secure the mounting plate to the wall, Do not run the adapter cable in walls; when securing the cable, do not cut or puncture.

    3. Set Channel switch on camera to 1 or 2. Slide the camera onto the alignment and locking pins of the mounting plate. Plug in AC adapter into camera.

    4. Adjust antenna and camera angle as needed for the clearest picture.

 

GE Wireless Security Camera with Handheld LCD, Color and Night Vision Accessories

See Flash demo for product images and multimedia.

 

Easy2 Technologies