Loading

Jasco Products - GE Wireless Security Camera with TV Receiver, Color and Night Vision Product Demo

GE Wireless Security Camera with TV Receiver, Color and Night Vision Features

  • View 1

    • Monitor with Ease:

      Easily listen and view any area of your home day or night. This camera wirelessly transmits audio and video up to 200 feet. It features night vision for low or no light viewing.

    • Small Size:

      Contemporary design.

    • "Wi-Fi" Friendly:

      It won't interfere with your home wireless network.

    • Quick to Alert:

      Alerts you when sound is detected within a monitored area.

    • For Use Indoors or Outdoors:

 

GE Wireless Security Camera with TV Receiver, Color and Night Vision Category Video

See Flash demo for product images and multimedia.

 

GE Wireless Security Camera with TV Receiver, Color and Night Vision Product Video

See Flash demo for product images and multimedia.

 

GE Wireless Security Camera with TV Receiver, Color and Night Vision Instructions

  • Wireless Color Camera with Reciever
  • Package Contents

    Please check and identify all the parts before proceeding with the installation.

  • Before you Install
  • Choosing a Camera Mounting Area

    The 45233 Wireless Color Camera can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or outdoor use. When choosing a mounting location, please be advised:

  • Choosing a Camera Mounting Area

    The 45233 Wireless Color Camera can be positioned on a desktop, or mounted to a wall. It is suitable for indoor or outdoor use. When choosing a mounting location, please be advised:

  • Connecting a TV or Monitor

    To prepare for installation of the system, we recommend that you temporarily connect the 45234 Receiver to a TV or Monitor to help you choose the best location for installing the camera. The camera connects wirelessly and automatically to the receiver when both are powered on and within 200 ft (unobstructed view) of each other. This system will accommodate up to 2 cameras.

    1. Connect one end of the cable (3.5mm male) to the rear of the receiver, and the other end (white/yellow) to your television’s A/V inputs. Match the yellow plug to the yellow VIDEO IN jack and the white plug to the white AUDIO IN jack.

    2. Plug the AC adapter into the power jack (marked on the back of the receiver, then into an AC outlet.

    3. Loosen the antenna nut and rotate the antenna to a vertical position. Tighten antenna nut so it is snug. Do not over-tighten. Place the receiver either on top or near to your TV.

    4. Set your TV to monitor the VIDEO INPUT designated for the Receiver.

  • Channel Selection: Manual Mode

    To select one of the two channels manually, press the MANUAL button on the top panel of the Monitor. The green LED will light for the corresponding channel. The receiver will switch to a different channel (1 or 2) each time the MANUAL button is pressed. When you have selected the channel with the active camera, that video will appear on the monitor/TV screen. Each camera must be assigned to a specific channel; both cameras cannot be on the same channel or the signals will cancel out.

  • Channel Selection: Multi-Camera Operation

    This wireless surveillance system is designed to work with up to 2 cameras. Additional cameras are sold separately. IMPORTANT: When using more than one camera, each camera must be assigned to a specific channel using the channel selection switch located on the underside of the camera housing. Select either 1 or 2 for each camera. Each camera must be assigned to a specific channel; both cameras cannot be on the same channel or the signals will cancel out. If using only one camera you can select either Ch 1 or Ch 2, whichever provides the best picture. The slide switch located on the rear of the Receiver must be set to reflect the channels in use.

  • Channel Selection: Auto Mode (2 Camera Operation)
  • Channel Selection: Cycle Time Setting

    (Time interval between camera selections)

  • Night Vision

    The 45233 Wireless Color Camera features Night Vision technology. Objects and images can be seen in little or no light up to 10 ft. The camera uses a special image sensor that automatically detects available light levels. It turns on/off the Infra-Red (IR) LEDS on the front of the camera. These LEDs provide artificial light that allows the camera to ‘see’ in the dark. Night Vision will appear as a Black and White image. When the image sensor detects enough light, color will return to the images.

  • Auto Detection and Notification Feature

    This feature allows the system to emit an audio alert whenever sound is detected within a monitored area. When the camera detects a sound, the receiver will sound an alert and a notification light will fl ash. The feature can be turned ON/OFF by pressing the button on the front panel of the receiver. The sensitivity for the level of audio detection (when the receiver will sound an alert) can be adjusted with the sensitivity control located at the back of the receiver.

  • Camera Installation
  • Desktop Mount

    1. Place camera in desired location on a flat surface.

    2. Set Channel switch on camera to 1 or 2.

    3. Power ON the TV/monitor; reconnect AC adapter to the camera.

    4. Select the channel (1 or 2) on the receiver that corresponds to the camera channel setting. (See Channel Selection)

    5. Adjust antenna and camera angle as needed for the clearest picture. Positioning the antenna upwards to improve sensitivity, and downwards to reduce sensitivity. Take care not to force the antennas past their lock positions.

  • Wall Mount

    1. To simplify the wall mount process, you will find a custom wall mounting plate included with the mounting hardware.

    2. Select the ideal location. Using the supplied mount as a template, drill two 3/16” holes in the desired mounting location, and install the two wall anchors (included) into the holes, or screw directly into a wall stud. Secure the mounting plate to the wall. Do not run the adapter cable in walls; when securing the cable, do not cut or puncture.

    3. Set Channel switch on camera to 1 or 2. Slide the camera onto the alignment and locking pins of the mounting plate. Plug in AC adapter into camera.

    4. Adjust antenna and camera angle as needed for the clearest picture.

  • Connecting to VCR or DVR

    You can connect the 45234 camera system to a VCR or DVR in order to record the images received from up to 2 cameras. The VCR or DVR must also be connected a TV/Monitor in order to see live or recorded images.

 

GE Wireless Security Camera with TV Receiver, Color and Night Vision Accessories

See Flash demo for product images and multimedia.

 

GE Wireless Security Camera with TV Receiver, Color and Night Vision HD Long Copy

See Flash demo for product images and multimedia.

 

Easy2 Technologies