Add an extra alarm siren to your existing system. It's perfect for 2nd floors, garages or workshops. It will mount anywhere in your home.
Low battery notification.
Identify all the parts before proceeding.
The Alarm Siren will increase your system’s sound. Use in areas where the Control Center’s siren cannot be heard.
In order to link the Alarm Siren to the Control Center, you will need to have the Alarm Siren and Control Center near each other.
Step 1 - Remove cover on bottom of the Alarm Siren. Plug in the AC adapter. Insert the antenna and slide mode switch to the ‘ON’ position.
Step 2 - Press and hold the Learn button inside the Alarm Siren. The ‘ON’ indicator on the front will begin to flash and it will sound continuous beeps.
Step 3 - While continuing to press the Learn button on the Alarm Siren, press and hold the Mute button on the side of the Control Center for three seconds. The Control Center will send a test signal to the Alarm Siren. When the Alarm Siren receives the test signal it will sound a long tone and the ‘ON’ indicator will stop flashing.
Step 4 - Release all buttons
This indicates the Alarm Siren has been linked with the Control Center. Replace cover to Alarm Siren.
Turn the Alarm Siren over and adjust the triangle hang tags as shown. After you have turned the triangle hang tags into the correct position, now you are ready to install.
Find the place that you would like to hang the Alarm Siren. Use the screws included for wood, or the screws and anchors included for drywall mounting, as shown.