Loading

Jasco Products - Wireless Alarm System Silent Alert Product Demo

Wireless Alarm System Silent Alert Features

  • View 1

    • Customizable:

      Create your own alarm system to meet your individual needs. The silent alert warns you your alarm has been activated before you enter your home. This unit requires a Choice Alert control center.

    • Expandable:

      Add as many silent alerts as you need.

    • Flashing LED:

      Lets you know the alarm has been triggered or when battery is low.

    • Operates Up to 150 Feet:
    • Easy to Set Up and Use:

 

Wireless Alarm System Silent Alert Category Video

See Flash demo for product images and multimedia.

 

Wireless Alarm System Silent Alert Product Video

See Flash demo for product images and multimedia.

 

Wireless Alarm System Silent Alert Instructions

  • Wireless Alarm System Silent Alert
  • PreCautions
  • Parts Check List

    Identify all the parts before proceeding. The Silent Alert is designed to provide a visual warning BEFORE entering the home if an alarm has been triggered.

    You can add any number of Silent Alert LED indicators to the Choice Alert System. To add a Silent Alert to the system, you will need to link it with the Control Center.

  • Adding a Silent Alert™

    In order to link the Silent Alert to the Control Center, you will need to have the Silent Alert and Control Center near each other.

    Step 1 - Open the Silent Alert by gently inserting a small blade screwdriver into the tab slot on one end and gently pry upwards. This action releases the cover from the base. This procedure can be easily completed once the Silent Alert is mounted as well. Install two (2) new “AA” batteries according to the polarity markings in the battery compartment.

    Step 2 - Press and hold the Learn button inside the Silent Alert. One of the LED indicators on the front of the Silent Alert will begin to flash.

  • Adding a Silent Alert™

    Step 3 - While continuing to press the Learn button in the Silent Alert, press and hold the Mute button on the side of the Control Center for three seconds.

    Step 4 - Release all buttons.

    The Control Center will sound two beeps and flash the green power indicator, this indicates a test signal was sent to the Silent Alert. When the Silent Alert receives the test Signal, the LED indicator will stop flashing, indicating it has been linked with your Control Center. Reattach the Silent Alert to the base.

    Anytime the alarm is triggered (in Armed HOME or AWAY), and the siren sounds, the Control Center will send a signal to the Silent Alert to begin alternately flashing its LED indicators. The Silent Alert will continue to flash the LED indicators until the Control Center sends a disarm signal.

    Note: Even if the Control Center is disconnected from power or destroyed, the Silent Alert will continue to flash LED indicators.

  • Installation

    You will need to determine if the surface to mount the Silent Alert is smooth or rough/porous. If smooth you can use the included double sided tape. When using doublesided tape apply to clean dry surface. Remove one side of the tape and attach it to the back side of the Silent Alert. Once the mounting surface is ready, remove the other side of the double side tape and press into position.

    If the mounting surface is rough or porous, you will need to use the rubber gromments and screws (included). Secure the plate to the desired location with the screws.

 

Wireless Alarm System Silent Alert Accessories

See Flash demo for product images and multimedia.

 

Easy2 Technologies