Loading

Jasco Products - Wireless Alarm System Control Center & Door/Window Sensor Kit Product Demo

Wireless Alarm System Control Center & Door/Window Sensor Kit Features

  • View 1

    • Create Your Own Alarm System:

      Begin with the control center, then choose any additional sensors to add to your selection. Be alerted to open doors or windows.

    • Expandable:

      Expand this security system whenever necessary.

    • Multiple Zone Security:

      Create up to four secure zones.

    • Control From One Location:

      Control additional accessories and sensors from one location.

    • Simple To Install:

      Easy to use.

 

Wireless Alarm System Control Center & Door/Window Sensor Kit Category Video

See Flash demo for product images and multimedia.

 

Wireless Alarm System Control Center & Door/Window Sensor Kit Product Video

See Flash demo for product images and multimedia.

 

Wireless Alarm System Control Center & Door/Window Sensor Kit Instructions

  • Wireless Alarm System Control Center & Door/Window Sensor
  • PreCautions
  • Parts Check List

    Identify all the parts before proceeding.

  • Preparing the Sensor for Installation
  • For Interior Mounting

    The Sensor & Magnetic Contact can be mounted vertically or horizontally but note that the Magnetic Contact must be aligned (on the same side) as the red marking on the Sensor. The red marking indicates which side the contact switch is located inside the Sensor.

  • For Interior Mounting

    The gap between the Magnetic Contact and the Sensor must be no greater than 1/2”. Select a position on the door frame or window frame to mount the Sensor; Depending on what side of the door the Sensor is mounted, the Sensor cover can be rotated, but the red marks must always be aligned in order for the Sensor to function correctly.

  • For Interior Mounting

    Mount the Magnetic Contact on the door or window (the part that moves). In most applications you can use double sided tape (included). It is strongly suggested to mount Sensor and Magnetic Contact lightly to insure proper function/gap distance. Once you are confident with the mounting position apply pressure to secure both pieces to surface. Use the two screw caps to cover the screw holes on the Magnetic Contact, they simply snap into the holes for a clean appearance.

  • For Exterior Mounting
  • For Exterior Mounting
  • Assigning the Sensor a Zone
  • Follow Steps to Assign a Zone

    Step 1 – Press and hold the Learn button on the Control Center for three seconds. When the Control Center sounds a long beep, release the Learn button.

    Step 2 – Press the Zone button (1, 2, 3 or 4) for the Zone you want to assign to the Window/Door Sensor. The LED indicator for that Zone will begin to flash.

    Step 3 – Release all buttons.
    Note: Zone 4 is for dedicated alerts only. Sensors in this Zone will not trigger an alarm or chime.

    Step 4 – Activate the Window/Door Sensor
    - For the Window/Door Sensor, separate the two pieces or if mounted, open the door or window.

 

Wireless Alarm System Control Center & Door/Window Sensor Kit Accessories

See Flash demo for product images and multimedia.

 

Easy2 Technologies