Loading

Jasco Products - Motion Sensing Alarm with Remote Control Product Demo

Motion Sensing Alarm with Remote Control Features

  • View 1

    • Motion Sensor:

      Use this motion sensor to detect motion from up to 20 feet away. Use the remote to activate or deactivate it. When motion is detected a 120dB alarm or a chime sounds.

    • Two Modes:

      Select either the chime or alarm mode.

    • Low Battery Indicator:
    • Keychain Remote:

      Convenient Keychain remote used for Arming & Disarming. Additional secure remotes are available.

 

Motion Sensing Alarm with Remote Control Category Video

See Flash demo for product images and multimedia.

 

Motion Sensing Alarm with Remote Control Product Video

See Flash demo for product images and multimedia.

 

Motion Sensing Alarm with Remote Control Instructions

  • Motion Sensing Alarm with Remote Control
  • Parts Check List

    Low Battery Indicator

    The Motion Sensing Alarm has a low battery indicator light. If the batteries need to be replaced, the indicator light will flash slowly. Average battery life for typical usage is up to one year.

  • Installing Batteries in the Alarm

    The Remote Controlled Motion Sensing Alarm requires 3 AA Alkaline batteries (not included).

    The battery compartment is located on the back of the unit.

    1. Remove the battery compartment screw and slide off cover in the direction of the open arrow.

    2. Insert (3) AA batteries (not included). Take care to note the polarity diagram inside the battery compartment.

    3. Replace the cover and secure screw.

  • Installing Batteries in the Remote Control

    The Remote Control requires a CR2032 battery (included). Average battery life for typical usage is one year.

    1. Slide off battery compartment cover located on the back of the remote control.

    2. Insert a 2032 battery noting polarity inside the battery compartment.

    3. Replace cover.

  • Linking the Remote to the Alarm

    Make sure you have installed the batteries before proceeding.

    1. Remove the battery compartment screw and slide off cover in the direction of the open arrow. Locate LEARN button.

    2. Press the LEARN button.

    3. Immediately point the remote controltowards the front of the alarm unit and press the ARM button. The alarm will sound a single short tone, and the light will stop flashing to confirm the remote has been linked to the alarm. The alarm unit will now respond to the remote.

    4. Replace cover to the batterycompartment of the main unit and secure screw. The alarm is now in standby mode.

    NOTE: Additional remotes can be added to the system by following the same programming procedure.

  • Installation

    The unit is designed to be wall mounted with the ball and socket mount (included). The ball and socket mount will provide the flexibility to aim the motion sensor in a particular direction.

    1. Choose your desired location, such as the corner of the room. This will provide maximum coverage. NOTE: The sensor has a 15-20 ft. detection zone, with approximate angles of 110˚ horizontal x 70˚ vertical. Recommended installation height is 6 to 8 feet.

  • Installation

    2. Secure ball and socket mount to the wall using either the provided wall anchors or by screwing directly into a wall stud. Once installed securely on the wall, slide insert bracket of mount into the back of the unit and lock in place. The mount will click when secured to the alarm.

  • Operating in Alarm Mode

    1. Locate the ALARM/CHIME switch on the side of the remote.

    2. Slide switch to ALARM mode.

  • Arming the Alarm
  • Arming the Alarm
  • Disarming the Alarm

    When returning to the protected area, the unit will beep once if motion is sensed.

    NOTE: To test, a cloth can be used to cover the alarm to reduce risk of hearing damage.

  • Operating in Chime Mode

    The chime is used to notify you when motion is sensed in the area.

    1. Locate ALARM/CHIME switch on the side of the remote.

    2. Slide switch to CHIME mode.

  • Operating in Chime Mode
  • Panic Feature

 

Motion Sensing Alarm with Remote Control Accessories

See Flash demo for product images and multimedia.

 

Easy2 Technologies