Loading

Jasco Products - GE Personal Security Alarm System Kit Product Demo

GE Personal Security Alarm System Kit Features

  • View 1

    • Door Alarm Delay:

      A 120dB alarm sounds when window or door is opened. 4 digit keypad code activates or deactivates alarm. Door alarm delay feature allows you to enter and leave without triggering the alarm.

    • Select Your Own 4 Digit Code:
    • Alarm Delay:

      Door alarm has a 45 second exit delay and 30 second entry delay.

    • Concealed Power Switch:

      Window alarms feature a concealed power switch and armed/disarmed indicator.

    • Low Battery Indicator Light:

 

GE Personal Security Alarm System Kit Category Video

See Flash demo for product images and multimedia.

 

GE Personal Security Alarm System Kit Door Alarm

See Flash demo for product images and multimedia.

 

GE Personal Security Alarm System Kit Window Alarm

See Flash demo for product images and multimedia.

 

GE Personal Security Alarm System Kit Instructions

  • Deluxe Door Alarm
  • Parts Check List

    Low Battery Indicator

    The alarm unit has a low battery circuit. When the batteries reach a low level, the indicator light will flash slowly. Average battery life for typical usage is up to one year.

  • Installing Batteries

    The keypad controlled door alarm requires three (3) AAA Alkaline batteries (not included).

    To install the batteries:

    1. Remove screw from battery compartment door located on back of the unit. Slide off the door in the direction of the arrow.

    2. Insert three (3) AAA batteries noting the polarity diagram inside the battery compartment.

    3. Replace door and secure screw.

  • Creating your Personal Alarm Code

    The keypad allows you to set a personal 4-digit code for arming and disarming the alarm.

    1. Remove screw from battery compartment door located on back of the unit. Slide off the door in the direction of the arrow.

    2. Press the LEARN button.

    3. The red light on the front of the alarm will blink for 15 seconds. During this time, input your 4-digit code. A beep will confirm each input. The unit will flash a green light 3 times to confirm the new 4-digit code has been saved.

    4. Replace cover and secure screw.

  • Installation

    1. Select desired location for alarm. The alarm is designed to mount to the door frame or to the door itself. Use either the provided screws (for permanent mounting) or double-sided tape (for temporary mounting). The recommended location is the back of the door, with the magnet mounted to the door frame. Mounting the alarm to the door ensures that the alarm will not be damaged by opening and closing the door.

  • Installation

    Note that the magnet may be mounted to either side of the alarm as long as the arrows line up.

    IMPORTANT: Whether mounting to the door or door frame, the gap distance between the alarm and magnet must be 1/2” or less.

  • Installation

    2. Attach the mounting plate to the back of the alarm. Peel the protective covering from one side of the double-sided tape and then apply to mounting plate. Remove protective covering from the back side of the double-sided tape and lightly mount the alarm in the desired position. Make sure the surface you are mounting to is clean and dry. For best results, clean the mounting surface with a mixture of 50% isopropyl alcohol and 50% water. Do not apply firm pressure until location is final.

    NOTE: When mounting to a door frame, the mounting plate mounts
    off-center to the left or right in order to position alarm closest to the edge of the door.

    3. Using double-sided tape, lightly attach the magnet to the opposite edge next to the alarm. Line up the arrows of the alarm and the magnet. Ensure the distance between the two pieces is 1/2” or less. To test the gap distance, slide the ALARM/CHIME switch to CHIME and open the door. If chime sounds, then the gap distance is correct. If it does not sound, move either the alarm or magnet closer so that gap distance is 1/2” or less.

    4. Once you have confirmed the correct positioning of the magnet and alarm, lift the alarm off the mounting plate and apply firm pressure directly to the plate itself. Once secured, reattach the alarm to the mounting plate.

    5. Apply firm pressure to the magnet to secure its position as well.

  • Operating in Alarm Mode
  • Home Mode
  • Away Mode
  • Arming the Alarm
  • Disarming the Alarm
  • Incorrect Code
  • Operating in Chime Mode

 

GE Personal Security Alarm System Kit Accessories

See Flash demo for product images and multimedia.

 

Easy2 Technologies