Rust-Oleum - Rust-Oleum Color Shift Product Demo

Rust-Oleum Color Shift Intro

See Flash demo for product images and multimedia.


Rust-Oleum Color Shift Product Features

  • View 1

    • Any-Angle Spray with Comfort and Spray Tip:

      Any-Angle Spray technology allows the can to be turned upside down for those hard-to-reach surfaces.

      Comfort Tip reduces finger fatigue.

    • Durable For Indoor and Outdoor Use:

      Perfect for bikes, helmets, rims, automotive accessories, home decor, sporting equipment, electronics and most other objects.

    • Fast Dry Formulation:

      Fast-dry formula resists chipping and fading.

    • Applies to All Surfaces:

      Ideal for surfaces such as wood, metal and plastic.


Rust-Oleum Color Shift Product Colors

  • Specification 1

    • Galaxy Blue
      Shifts from a vibrant blue through a purplish-silver into a red-orange.

  • Specification 2

    • Gamma Green
      Shifts from a bright silver through a purplish-blue into green.


Rust-Oleum Color Shift Painting Instructions

  • Specification 1

    • Painting Conditions:

    • Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy, dusty conditions. Cover surrounding area to protect from spray mist.


  • Specification 2

    • Preparation:

    • Remove loose paint and rust with wire brush or sandpaper. Lightly sand glossy surfaces.


  • Specification 3

    • Clean:

    • Clean with soap and water, rinse and let dry.


  • Specification 4

    • Application Tip:

    • For best results, must apply over a black base coat (black primer, paint, or surface).


  • Specification 5

    • Painting:

    • Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use. Hold can upright 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying.


  • Specification 6

    • Application Tip:

    • The more coats, the more dramatic the effect will be.


  • Specification 7

    • Dry & Recoat Times:

    • Allow more time at cooler temperatures. Dries to the touch in 20 minutes, to handle in one hour and fully dry in 24 hours. Apply a second coat or Clear coat within one hour or after 24 hours.
      (based on 70°F – 50% relative humidity)



Easy2 Technologies