QuickPair™ technology provides fast and easy set-up with Bluetooth® mobile phones
Digital Signal Processing (DSP) and careful mic placement reduce noise from calls, enhancing Plantronics' signature high-quality audio.
Separate controls for volume, powering on or off, and call answer/end.
Convenient on-off power slide switch lets you preserve the battery.
Keep tabs on your battery level: press both volume and call buttons for 2 seconds and the LED flashes red to advise charge level. Recharge if you see 2 (low) or 3 (critically low) flashes.
An ergonomically designed swivel earloop fits either ear.
The contoured eartip helps direct audio so you don't strain to hear calls.
Your new headset performs best when it is fully charged.
While your headset is charging, the indicator light glows red. When your headset is fully charged, the indicator light turns blue.
Never charge the battery where the temperature may fall below 32°F (0°C) or rises above 104°F (40°C). Do not use your headset while it is connected to the charger.
1.Turn on the Bluetooth feature on your phone.
For most phones, select Settings/Tools > Connections >
Bluetooth > On. See your phone’s user guide for more information.
2 Turn the headset on by sliding the Power Switch toward the microphone.Wait until the indicator light flashes red then blue.
3 Set your Bluetooth phone to ‘discover’ to locate the headset.
This usually involves going to ‘setup’, ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add a device’.
4 Once available headsets are listed, select your headset (for example 2XXPlantronics). If prompted for a passkey, enter 0000. When pairing is successful, the indicator on your headset flashes blue. Your phone will also confirm when pairing is complete.
Up to 5 hours from full charge
Up to 7 days from full charge
Digital Signal Processing (DSP)
Acoustic echo cancellation
Mic placement to reduce wind noise
Power on/off switch
Volume up/down button
Call answer/end button
Supports phone's last number redial
Supports phone's voice-activated dialing
Easy Initial Pairing
2 hours for full charge
Rechargeable 85mA Li-ion polymer
Micro USB port
AC charger 100-200v
Version 2.1 + Enhanced Data Rate (EDR)
Supports Secure Simple Pairing (SSP)
Profiles: Hands-free (HFP) & Headset (HSP)
Up to 33ft range between headset and phone