Loading

InSinkErator - Involve™ H-View® / Involve™ H-Wave® Product Demo

Involve™ H-View® / Involve™ H-Wave® Instructions

  • Introduction
    • In-Sink-Erator Instant Hot Water Dispenser
    • Filter
    • On Demand
  • Tools
    • Cordless Drill
    • Phillips and flat head screwdrivers
    • Adjustable wrench
    • Pliers
    • Utility knife
    • Pencil
    • Ruler
    • Tube bender
    • Tube cutter
    • 3/8" compression fitting
    • Pan to catch drips
    • Cord ties or wraps for tubing, cabling
    • Level
  • Planning
    • Grounded  Electric Outlet
    • Cold-Water Plumbing Connection
    • Call Plumber, Electrician
    • Turn Off Water
    • Unpack
    • Straighten Copper Tubing
  • Faucet

    Seal on Dispenser/Value Body

    Surround Sink Mounting Hole

    Dimensions:

    Hole Diameter: 1-1/2"

    Rubber Washer: 1-5/8"

    Small Steel Washer: 1-5/8"

  • Faucet
    • Work From Under the Sink
    • Mount Plate on Stud
    • Attach Hex or Wing Nut
    • Partially Tighten With Tool
  • Head & Filter Bracket
    • Easy Plumbing Connections
    • Easy Filter Cartridge Replacement
    • Mark Mounting Hole Locations
    • Attach Bracket
    • Attach 6" Discharge Tube
  • Plumbing Connections
    • Variations in Models
    • Avoid Storage Area
    • Avoid Sharp Corners
    • Cut Perpindicular to the Tube to Insure a Proper Seal
    • Insert into Quick-Connects
  • Plumbing Connections
    • 3/8" Poly Tubing to Inlet
    • 3/8" Poly Tubing to Outlet
  • Cold Water Connection
    • Connect Input Filter Tube
    • Slide Nut, Female Over Tube
    • Push in Tube Insert
    • Tube into Fitting, Use a 3/8" Compression Fitting
    • Tighten
  • Tank Filling & Plug-In
    • Turn on Water
    • Dispenser Handle to HOT
    • Flush for 3 Minutes
    • Watertight
    • Plug-in Tank
    • 10 to 15 Minutes to Reach Temperature
  • Temperature Adjustment
    • Adjust Thermostat to Desired Temperature

 

Easy2 Technologies