Liquid Nails - LIQUID NAILS® Wood Projects Construction Adhesive Product Demo

LIQUID NAILS® Wood Projects Construction Adhesive Intro

See Flash demo for product images and multimedia.


LIQUID NAILS® Wood Projects Construction Adhesive Features

  • View 1

    • Strong Durable Bond:

      Up to 200% stronger than fasteners alone, and includes a permanent weatherproof bond.

    • Ideal for Indoor and Outdoor Projects:
    • Guaranteed for All Wood:

      Including paneling, molding, plywood, OSB, dimensional lumber, pressure treated lumber and other wood products.

    • Certified to the GREENGUARD Children & Schools Standard:


LIQUID NAILS® Wood Projects Construction Adhesive Application Tips

  • Specification 1

      For best results, adhesive and both surfaces should be at room temperature. All substrates must be structurally sound, and the surface where the adhesive is to be applied should be thoroughly clean and dry.

      Surfaces must be clean, structurally sound, and free of loose particles. For smooth surfaces, adhesion can be improved by lightly sanding bond areas prior to applying adhesive.
          1. Insert tube into standard caulking gun.
          2. Cut nozzle at a 45 ̊ angle to desired size.
          3. Squeeze the trigger to break inner seal.

      Apply 1/4" bead of adhesive approximately 1" from edge of panel around the perimeter. Apply two zig-zag 1/4" beads in the middle of the panel. Press panel firmly into place. Due to panel inconsistencies, for best results, bracing and/or nailing may be required.

      Apply 1/4" zig-zag bead to back of molding. Press molding firmly into place. Starting at one end, nail every 12".

      Use water to remove wet adhesive. For dried adhesive, scrape off and remove residue by wiping with mineral spirits.


LIQUID NAILS® Wood Projects Construction Adhesive Application Photos

See Flash demo for product images and multimedia.


LIQUID NAILS® Wood Projects Construction Adhesive Specs

  • Specification 1


      • Lumber
      • Treated lumber
      • Wood molding
      • Paneling
      • Drywall
      • Waferboard
      • Particleboard
      • OSB
      • Plywood


      • Foamboard
      • Plastics
      • Marble
      • 1/8" Medium Density (MDF) Fiberboard Paneling

      Base: Latex
      Type: Waterborne
      Color: White
      Appearance: Smooth
      ApplicationTemperature: 40° to 100° F (4° to 38° C)
      Service Temperature: -20 to 140° F (-29° to 60° C)
      Adhesion: Excellent to most common building substrates
      Extrudability: Very easy to gun at room temperature
      Consistency: Short, non-sag
      Bridging Ability: Excellent, bridges gaps up to 3/8" (1 cm)
      Shear Strength: 24 hours – 350 psi
      48 hours – 450 psi
      7 days – 500 psi
      Durability: Excellent; estimated to exceed 40 years
      Flexibility: Good
      Sag: Non sag in normal use
      WaterResistance: Very good
      ExteriorWeathering: Not recommended
      Aging: Excellent
      Freeze-Thaw Stable: Passes 5 cycles
      Bleed: None
      Staining: None
      Odor: Very mild latex
      DryingTime: Completely dry in two weeks
      Paintability: Paintable with oil or latex
      WeightPerGallon: 10.99 pounds (1.32 kg/l)
      Viscosity: 200,000 CPS
      Volatiles: 41%
      Solids: 59%
      Flammability: Nonflammable
      FlashPoint: >205° F (96°C)
      Coverage: 10 oz. (296 ml) 30 lineal ft. using 1/4" bead; 28 oz. (828 ml) 85 lineal ft. using 1/4" bead
      ShelfLife: 12 months from date of purchase
      Specifications: Passes APA AFG-01, ASTM D-3498 and ASTM C-557
      MAXVOC: 20 GPL


Easy2 Technologies