GREEENGUARD children and schools certified.
APPLYING THE PRODUCT
Insert tube into caulking gun. Cut nozzle to desired bead size marked on nozzle. Puncture inner seal with nail or wire. Apply adhesive in temperature of 60°F or higher. Press material into place. Lift off for 2-4 minutes, then press back into place. Material should not be applied to skinned adhesive. Do not apply to moist concrete or masonry.
Note: One surface must be porous.
Bonding material to furring strips or studs: Apply a zigzag 1/4" bead of adhesive to each strip or stud to be covered by material. Position materials so edges meet at stud center. Press firmly into place. Finishing nails required at top and bottom.
Bonding foamboard, foamback tub surrounds, paneling, corkboard, brick veneer, etc. to flat surfaces: Cover entire substrate with 1/4" vertical zig-zag bead a maximum of 12" apart and within 1-1/2" of all edges.
CLEAN-UP
Water for wet adhesive. Scraping, followed by wipe with mineral spirits for dried adhesive.
RECOMMENDED FOR interior installations and all common building materials, including:
NOT RECOMMENDED FOR flooring, mirrors, ceiling tiles, marble, granite or synthetic marble and granite, or 1/8" medium density fiberboard paneling.
TECHNICAL INFORMATION
Base: Latex
Color: Off-white
Appearance: Smooth paste
Application Temperature: 40° to 100° F (5° to 38° C)
Service Temperature: -20° to 140° F (-29° to 60° C)
Recommended Storage Temperature: 40° to 100° F (4° to 38°C)
Adhesion: Excellent to all common building materials
Consistency: Non-sag
Bridging Ability: Excellent; bridges gaps to 3/8" (1 cm)
Extrudability: Very good
Shear Strength:
24 hours – 300 psi
48 hours – 350 psi
1 week – 400 psi
Durability: Very good; estimaged to exceed 20 years
Flexibility: Very good
Water Resistance: Very good
Aging: Very good after accelerated aging cycle
Freeze-Thaw Stable: Does not freeze
Bleed: None
Staining: May stain real or cultured marble and granite
Odor: Mild
Working Time: 30 minutes
Weight Per Gallon: 12.2 pounds (5.8 kg/l)
Viscosity: 400,000 CPS
Volatiles: 38%
Solids: 62%
Flammability: Non-flammable
Flash Point: >200°F (>93°C)
Coverage: Using full round 1/4" (.64 cm) bead: 10 oz. (310 ml) - 30 lineal feet (10 lineal meters); 28 oz. (858 ml) - 85 lineal feet (27 lineal meters)
Shelf Life: 12 months from date of purchase
Specifications: Exceeds ASTM specification C-557
MAX VOC: 32 GPL