Rust-Oleum - Rustoleum American Accents - Designer Metallic Spray Product Demo

Rustoleum American Accents - Designer Metallic Spray Intro

See Flash demo for product images and multimedia.


Rustoleum American Accents - Designer Metallic Spray Features

  • View 1

    • Fast-Drying: Use to easy spray. Achieve finish in one coat. Dries in 10 minutes and can be recoated at anytime
    • Durable, Long-Lasting Finish: Metallic finish provides excellent coverage, chip resistance and color retention. Offers indoor and outdoor durability.
    • Sophisticated Satin Sheen: Available in 4 rich, satin colors that bring more sophisticated look to any household item.
    • Ideal for Furniture & Accessories: Ideal for use on indoor and outdoor wood, metal, wicker, masonry, unglazed ceramics, plaster and clay.


Rustoleum American Accents - Designer Metallic Spray Colors

See Flash demo for product images and multimedia.


Rustoleum American Accents - Designer Metallic Spray Instructions for Use

Painting Conditions: Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50°F (10°C) and 90°F (32°C) and humidity is below 85% to ensure proper drying. Do not apply to surfaces that, when heated, exceed 200°F (93°C) or galanized metal. Avoid spraying in very windy, dusty conditions. Cover surrounding area to protect from spray mist.

Preparation: Remove loose paint and rust with wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.

Priming: Use of American Accents® Primer provides superior adhesion and hiding. It is especially recommended for bare wood and metal.

Painting: Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use. Hold can upright 10-16° from surface and spray in a steady back-and-forth motion, slightly overapping watch stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. For best appearance, apply one light coat followed by one wet coat.

Dry & Recoat Times:  It is based on 70°F - 50% relative humidity. Allow more time at cooler temperatures. Dries to touch in 10 minutes and fully dry in 30 minutes. Recoat anytime.

Clean-up: When finished spraying, clear spray valve by turning can upside down and pushing spray button for 5 seconds. Clean up wet paint with Xylol or mineral spirits. Throw away empty can in trash pickup. Do not burn or place in home trash compactor.

Clogging: If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits. Do not stick pin or other object into the stem.


Easy2 Technologies