Loading

In-Sink-Erator - Insinkerator Evolution Premier Disposer Product Demo

Insinkerator Evolution Premier Disposer Features

  • View 1

    • Quiet Collar™ Sink Baffle: The baffle's design causes running water to pool in the sink's opening. The resulting "water dam" acts as a cap on the disposer and reduces the noise from the sink's opening.
    • Anti-Vibration Mount™: The Anti-Vibration Mount isolates the disposer in a cushion of rubber, which reduces the transfer of noise and vibration from the disposer to the sink.
    • GrindShear™ Ring: The ideal solution for stringy foods like cornhusks and celery is the GrindShear ring. It first grinds food into small particles along the surface of the ring. Then, the leftover particles are forced through a series of 40 pass-through windows and sheared into even finer waste.
  • View 2

    • Auto-Reverse Grind System™: The Auto-Reverse Grind System™ feature allows the disposer to reverse direction when a jam is imminent.

 

Insinkerator Evolution Premier Disposer 360 Rotation

See Flash demo for product images and multimedia.

 

Insinkerator Evolution Premier Disposer Specs

Type of Feed: Continuous
On/Off Control: Wall Switch
Motor: Single Phase
HP: 3/4
Volts: 120
HZ: 60
RPM: 1725
Amp. (Avg. Load): 8.1
Time Rating: Intermittent
Lubrication: Permanently Lubricated Upper & Lower Bearings
Shipping Weight (Approx.): 20.8 lbs.
Overall Height: 12-5/8”
Reversing: Auto-Reverse Grind System™ feature
SoundSeal Technology:
  • Anti-Vibration Mount™
  • Anti-Vibration Tailpipe Mount™
  • Quiet Collar™ Sink Baffle
  • SoundLimiter™ Insulation
MultiGrind Technology: GrindShear Ring™
Grind Chamber Capacity: 40 oz.
Motor Protection: Manual Reset Overload
Average Water Usage: 1/4 Gallon Per Person Per Day
Average Electrical Usage: 1/2 KWH Per Month
Drain Connection: 1-1/2” Anti-Vibration (Hose Clamp)
Dishwasher Drain Connection: Yes

 

Insinkerator Evolution Premier Disposer Installation

  • Tools and Materials Needed
    • Slotted Screwdriver
    • Adjustable Pliers
    • Plumber's Putty
    • Electrical Tape
    • Wire Nuts (2)
  • Optional Tools and Materials
    • Phillips Screwdriver
    • Drain Auger
    • 3/8" Electrical Clamp Connector
    • Second 1 1/2" Drain Trap
    • Hammer
    • Hacksaw
    • Water Hose Clamp
    • Pipe Wrench
    • Copper Ground wire
    • Dishwasher Drain Connection Kit
    • Air Gap
    • Drain Tube Extension
    • Electrical On/Off Switch or InSinkErator SinkTop Switch™
    • InSinkErator Power Cord Kit
  • Overview
    • Turn off power
    • Remove existing disposer
    • Check condition of mounting hardware
    • Connect drain and install disposer
  • Remove Existing Drain
    • Loosen and remove drain pipe & trap
    • Loosen strainer nut and remove
    • Clean off old putty around drain
  • Installing Mounting Bracket
    • Place putty around opening
    • Press flange into place
    • Slide on pieces from under the sink
    • Tighten bracket
  • Tap Out Knockout Plug
    • If needed, tap out dishwasher plug
    • Lay disposer on its side
  • Mounting Preparation
    • Lay disposer on its side
    • Make electrical connections
  • Installation of Disposer
    • Mount disposer under sink
    • Connect discharge tube to drain plumbing
    • Connect dishwasher drain to disposer
    • Lock the disposal into place
    • Insert Quiet Collar baffle
  • Cover Control Model Installation
    • Mount disposer under sink
    • Connect discharge tube to drain plumbing
    • Connect dishwasher drain to disposer
    • Lock the disposal into place
    • Snap the cover control into place
  • Final Steps
    • Lock the disposer into place
    • Test for leaks
    • Turn electrical on and test operation

 

Insinkerator Evolution Premier Disposer Replacement

  • Tools and Materials Needed
    • Slotted Screwdriver
    • Adjustable Pliers
    • Plumber's Putty
    • Electrical Tape
    • Wire Nuts (2)
  • Optional Tools and Materials
    • Phillips Screwdriver
    • Drain Auger
    • 3/8" Electrical Clamp Connector
    • Second 1 1/2" Drain Trap
    • Hammer
    • Hacksaw
    • Water Hose Clamp
    • Pipe Wrench
    • Copper Ground wire
    • Dishwasher Drain Connection Kit
    • Air Gap
    • Drain Tube Extension
    • Electrical On/Off Switch or InSinkErator SinkTop Switch™
    • InSinkErator Power Cord Kit
  • Overview
    • Turn off power
    • Remove existing disposer
    • Check condition of mounting hardware
    • Connect drain and install disposer
  • Removing Existing Disposer
    • Turn off power
    • Disconnect drain trap
    • Loosen mounting ring
    • Disconnect electrical connections
  • Removing Mounting Hardware
    • Loosen mounting screws
    • Pry off snap ring
    • Remove mounting assembly
    • Push old sink flange up through sink hole
  • Installing Mounting Bracket
    • Place putty around opening
    • Press flange into place
    • Slide on pieces from under the sink
    • Tighten bracket
  • Tap Out Knockout Plug
    • If needed, tap out dishwasher plug
    • Lay disposer on its side
  • Mounting Preparation
    • Lay disposer on its side
    • Make electrical connections
  • Installation of Disposer
    • Mount disposer under sink
    • Connect discharge tube to drain plumbing
    • Connect dishwasher drain to disposer
    • Lock the disposal into place
    • Insert Quiet Collar baffle
  • Cover Control Model Installation
    • Mount disposer under sink
    • Connect discharge tube to drain plumbing
    • Connect dishwasher drain to disposer
    • Lock the disposal into place
    • Snap the cover control into place
  • Final Steps
    • Lock the disposer into place
    • Test for leaks
    • Turn electrical on and test operation

 

Easy2 Technologies