Loading

Schiller Grounds Care, Inc. - BOB-CAT® Full Size ZT Mowers: Power Unit – Top Side Product Demo

BOB-CAT® Full Size ZT Mowers: Power Unit – Top Side Susp. Seat Repair 1

  • Remove armrest
  • Remove the back cover
  • Set the tension on the weight adjustment
  • Remove the two screws hidden by dust boot
  • Remove bolts attaching back frame to lower frame
  • Picture of lower assembly with back & seat cushion removed
  • Remove lock nut from adjuster
  • Unscrew the adjuster knob
  • Unhook the springs from the back plate
  • Remove the springs from the saddle

 

BOB-CAT® Full Size ZT Mowers: Power Unit – Top Side Susp. Seat Repair 2

  • Remove upper bolt and nut
  • Remove bolts that are holding the straps
  • Tilt the straps down and pull them out of the back slots
  • Remove the straps
  • Take the saddle assembly out
  • Drive the bolt out of the lower shock mount
  • Drive lower shock mount bolt out of the saddle
  • Assemble new saddle kit

    Reinstall in reverse order of assembly

 

BOB-CAT® Full Size ZT Mowers: Power Unit – Top Side Ctrl Hndl – Weldment R&R

  • Remove the dampener
  • Push spring clip away from socket to get it to come off
  • Remove the battery

    WARNING- Always remove negative first, then positive and when you reinstall, reverse the procedure - positive first then negative.

  • Pull out hair pin and remove the Clevis pin
  • Remove the bolt going through the rod end of the turnbuckle
  • Remove the entire control handle and adjusting plate
  • Remove 2 outer bolts & nuts retaining pivot bearing
  • Remove the 2 bolts & nuts on the inner pivot bearing
  • Unplug interlock switch
  • Remove weldment assembly & clean bushings
  • Remove, clean and grease the spacer bushing
  • Remove switch and ball sockets for transfer to new weldment
  • Reinstall in the reverse order

    Expected time for this is approximately one hour or less.

 

Easy2 Technologies