Badger Basket Company - Badger Basket Elegance Round Baby Bassinet Product Demo

Badger Basket Elegance Round Baby Bassinet Intro

Badger Basket Elegance Round Baby Bassinet Features

• View 1

  • Generously Sized Interior:

    Measures 29.5 inches in diameter and is 8.5 inches deep.

  • Bedding Set:

    Includes a lovely skirt, soft bumper, fitted sheet, and drape canopy.

  • Mattress Pad:

    Includes a custom fitted, vinyl covered foam mattress pad (in order to comply with current safety standards, the mattress is approximately 1" thick).

  • Canopy:

    Graceful canopy shades the interior to keep out harsh light while Baby is snoozing. Canopy is also height adjustable.

  • Mobility:

    Bassinet also includes caster wheels.

  • Parts Warranty:

    30 day parts warranty to the original purchaser. If you need any assistance with the product parts or hardware upon opening the package, please contact Badger Basket Company (www.badgerbasket.com/parts).

• View 2

  • Bumper:

    Bumper attaches with grip tape and ribbon ties and is padded with polyester fill.

  • Storage:

    Storage shelf beneath the bassinet creates a storage area for feeding and changing necessities and toys.

    *Toys and accessories shown here not included.

  • Measurements:

    Overall unit measures 32"L x 32"W x 49"H, measures 31" from the rim of the bassinet to the floor.

  • Bedding:

    Bedding set is poly/cotton and machine washable. Tumble dry medium, warm iron if needed.

  • Weight:

    Bassinet is for use up to 20 lbs. (9.09 kg), 3-4 months, or until Baby can push up, roll over, or sit unassisted (whichever age, weight, or activity limit comes first).

  • Extra Sheets Available:

    Additional poly/cotton sheets sold separately in packages of two (Models #00025 for White and #00022 for Ecru).

Badger Basket Elegance Round Baby Bassinet Finishes

Badger Basket Elegance Round Baby Bassinet Assembly

• Step 1

  *IMPORTANT: These instructions offer an overview of the assembly process but are NOT complete assembly instructions. For the safety of your child and to prevent serious injury or death, the bassinet MUST be assembled using the complete instruction manual shipped with the product.

  • Attach ONE CASTER WHEEL (E) to each leg of the END PANELS (A) using ONE BOLT (E2) and ONE KNOB (E3) for each WHEEL (E1). The knobs go on the inside. The square hole on the wheel goes on the outside so the head of the bolt “locks” into the hole.
  • Take ONE END PANEL (A) and attach the TWO RAILS (B) using TWO LONG BOLTS(C). The grooves on the rails face inwards. The T-Nuts pre-installed on the end panels face out.
  • Slide the SHELF (D) into the grooves with the white warning label facing up. Then attach the second END PANEL (A) to the TWO RAILS (B) using TWO LONG BOLTS (C)
• Step 2
  • Using the FOUR L-BRACKETS (F) and the SIXTEEN SHORT BOLTS (G), bolt the BASSINET BODY (H) to the BASSINET STAND.
  • Put the bassinet body upside down, and then put the bassinet stand upside down on top of the bassinet body as shown in PICTURE 2B.
  • Line up the four pairs of holes on the END PANELS (A) with the four pairs of holes on the BASSINET BODY (H).
  • Position the L-BRACKETS (F) on the INSIDE OF THE END PANELS and secure them using the SIXTEEN SHORT BOLTS (G).
• Step 3

  With the bassinet in its upright position, wrap the FABRIC SKIRT (I) around the lower rim of the BASSINET BODY (H) pressing the grip tape strips together as you go around. Begin and end at the rear center where the metal spindle is located (the ends may overlap).
  

• Step 4

  There are two holes in the metal spindle on the bassinet body to height adjust the canopy. Insert the METAL CANOPY POLE (J) into the metal spindle on the bassinet body (H) and line up a hole on the metal spindle with the push button on the canopy pole. Make sure the push button snaps into the hole.

• Step 5
  • Insert the two free ends of the CANOPY FRAME (K) into the top of the CANOPY POLE (J). Tap gently with a hammer until the ends of the frame are fully seated inside the pole.
  • Place the FABRIC CANOPY (L) onto the CANOPY FRAME (K). Secure it to the frame with the ribbons and/or the grip tabs.
• Step 6
  • Position the FABRIC BUMPER (M) inside the BASSINET BODY (H). Position and then secure the tabs on the bumper to the thicker dowels and tie the ribbons, and then tie the remaining ribbons to the thinner dowels.
  • NOTE: Be sure the bumper is secured and check the rib- bons regularly to make sure they stay tied. Loose bedding can be a danger to your baby.
  • Put the FABRIC FITTED SHEET (N) onto the MATTRESS (O) and place them inside the bassinet. Additional sheets are sold separately! Contact us or check our web site for more information or to find a retailer.

   

Badger Basket Elegance Round Baby Bassinet Specs

• Specification 1

  •  

    Length:

    Width:

    Height:

    Max. Weight:

  •  

    32"

    32"

    49"

    20 lbs.

• Specification 2

  • Please assemble this bassinet in the room where you intend to use it unless your doorways are wider than 32".