Loading

Liquid Nails - LIQUID NAILS® Tub Surround & Shower Wall Adhesive Product Demo

LIQUID NAILS® Tub Surround & Shower Wall Adhesive Intro

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Tub Surround & Shower Wall Adhesive Features

  • View 1

    • No Burn Through:
    • Heat and Steam Resistant:
    • Water Resistant:
    • Great for Tub & Shower Units:
    • Light Color Won't Show Through:
    • Meets LEED Standards:
    • Meets National Green Building Standards:

 

LIQUID NAILS® Tub Surround & Shower Wall Adhesive Application Tips

  • Specification 1

    • SURFACE PREPARATION
      Make sure that all surfaces are clean, dry, structurally sound and free of any loose paint or other materials. Sand and roughen high gloss paint.

      DIRECTIONS
      Apply adhesive to surround panel in a 1/4 inch wide continuous bead approximately one inch from the edges of thepanel. An “S” or “X” shaped bead may be applied to the center portion of the panel. Press the panel into place on the wall within 15 minutes of the adhesive application. Press firmly into place. Repeat for remaining panels and corner units. For overlap areas and edges, this adhesive may be used as a caulk. Panels may be caulked at the time of installation. Allow adhesive and caulk to dry overnight prior to use.

      APPLICATION RATE
      32 linear feet per tube. A typical surround will require approximately 3 tubes of adhesive for installation, including caulking.

      CLEAN-UP
      Use water for wet adhesive. Use mineral spirits or an adhesive remover for dry adhesive.

       

 

LIQUID NAILS® Tub Surround & Shower Wall Adhesive Application Photos

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Tub Surround & Shower Wall Adhesive Specs

  • Specification 1

    • RECOMMENDED FOR bonding most plastic tub and shower enclosures over structurally sound drywall, plywood, hardboard, ceramic tile, greenboard and cement backerboard. It is also recommended for polystyrene foamback tub kits when adhesive venting method described under “Applying The Product” is followed.

      NOT RECOMMENDED FOR flooring applications, ceramics, mirrors, granite, and uses other than those above.

    • TECHNICAL INFORMATION

      Base: Vinyl Acrylic
      Type: Waterborne
      Color: Bright white
      Appearance: Smooth Paste
      Application Temperature: 40° to 100° F (4° to 38° C)
      Service Temperature: -20 to 200° F (-29° to 93° C)
      Adhesion: Good to most common building substrates
      Shear Strength: 24 hours – 300 psi
      7 days – 380 psi
      Consistency: Smooth paste
      Durability: Excellent
      Flexibility: Good to -10° F (-23° C)
      Volume Shrinkage: 40%
      Slump: Max 0.15”
      Shore “A” Hardness: 60
      Water Resistance: Good
      Freeze-Thaw Stable: Passes 5 cycles
      Bleed: None
      Staining: None
      Odor: Mild Acrylic
      Aging: Will not become Brittle
      Tack Free Time: Tack at drying time – none
      Tack at 24 hours – none
      Drying Time: Sets in 24 hours. Allow 5 days to completely dry
      Weight Per Gallon: 12.5 pounds (5.54 kg)
      Viscosity: 350,000 to 400,000 CPS
      Solids: 75%
      Flammability: Nonflammable
      Flash Point: Greater than 200°F (93°C)
      Coverage: Cartridge - 30 lineal ft. (9.14 lineal meters) using 1/4" (.64cm) bead; Squeeze tube - 17 lineal ft. (5.18 lineal meters) using 1/4" (.64cm) bead
      Shelf Life: 12 months from date of purchase
      MAX VOC: 28 GPL

 

LIQUID NAILS® Tub Surround & Shower Wall Adhesive Video

See Flash demo for product images and multimedia.

 

Easy2 Technologies