Loading

Liquid Nails - LIQUID NAILS® Paneling & Molding Adhesive Product Demo

LIQUID NAILS® Paneling & Molding Adhesive Intro

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Paneling & Molding Adhesive Features

  • View 1

    • Strong Instant Hold:
    • Reduces Nailing:
    • Retains Precise Placement:
    • Impact-Resistant:
    • 10 Minute Working Time:
    • Meets LEED Standards:
    • Meets National Green Building Standards:

 

LIQUID NAILS® Paneling & Molding Adhesive Application Tips

  • Specification 1

    • APPLYING THE PRODUCT
      Cut and prefit materials prior to installation. Insert tube into standard caulking gun. Cut nozzle at 45° angle to desired bead size marked on nozzle. Puncture inner seal with nail
      or wire.

      INSTANT-GRAB METHOD:

      Paneling: Apply 1/4" bead of adhesive approximately 1" from edge of panel around the perimeter. Apply two zigzag 1/4" beads in the middle of the panel. Press panel firmly into place.
      Due to panel inconsistencies, for best results, bracing and/or nailing may be required.

      Molding: Apply 1/4" zigzag bead to back of molding. Press molding firmly into place. Starting at one end, nail every 12".

      CLEAN-UP
      Use water to remove wet adhesive. For dried adhesive, scrape off and remove residue by wiping with mineral spirits.

 

LIQUID NAILS® Paneling & Molding Adhesive Application Photos

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Paneling & Molding Adhesive Specs

  • Specification 1

    • RECOMMENDED FOR installing:

      • Paneling
      • Wood molding
      • Furring strips
      • Plywood/hardboard
      • Corkboard

      NOT RECOMMENDED FOR

      • Uses other than paneling and molding installations
      • Use between non-porous surfaces
      • Exterior use

       

    • TECHNICAL INFORMATION

      Base: Styrene butadiene latex
      Color: Tan
      Appearance: Smooth
      Application Temperature: 40° to 100° F (5° to 38° C)
      Service Temperature: 0° to 140° F (-18° to 60° C)
      Adhesion: Excellent
      Extrudability: Easy
      Consistency: Short and buttery
      Bridging Ability: Excellent
      Shear Strength:
      24 hours – 150 psi
      48 hours – 180 psi
      7 days – 240 psi
      Durability: Excellent; 20 year life
      Flexibility: Excellent
      Water Resistance: Excellent
      Aging: Excellent; 20 year life
      Bleed: Will not bleed
      Odor: Mild
      Open Time: 20 minutes
      Weight Per Gallon: 11.5 pounds (1.38 kg/l)
      Viscosity: 440,000 CPS
      Volatiles: 28%
      Solids: 72%
      Flammability: Non-flammable
      FlashPoint: 1° F (-17°C)
      Coverage: 30 lineal feet using 1/4" bead
      ShelfLife: 12 months from date of purchase
      MAXVOC: 69 GPL

 

Easy2 Technologies