Loading

Liquid Nails - LIQUID NAILS® Subfloor & Deck Construction Adhesive Product Demo

LIQUID NAILS® Subfloor & Deck Construction Adhesive Intro

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Subfloor & Deck Construction Adhesive Features

  • View 1

    • Eliminates Squeaky Floors*:

      *When applied as directed.

    • Easy Cold Weather Gunning Formula:
    • Bonds Wet, Frozen and Treated Lumber:
    • Bonds Composite Materials:
    • Tough, Durable and Flexible:

 

LIQUID NAILS® Subfloor & Deck Construction Adhesive Video

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Subfloor & Deck Construction Adhesive Application Tips

  • Specification 1

    • SURFACE PREPARATION
      Make sure that all surfaces are clean, structurally sound and free of excess water. Wood can be damp, but the adhesive will take longer to dry. LN-602/LNP-602 can be applied at temperatures as low as 10°F (-12°C).

      APPLYING THE PRODUCT
      Condition LN-602/LNP-602 adhesive to at least 40°F (4°C) for easier gunning. Adhere materials within 15 minutes of gunning adhesive. Make sure skin of bead is broken. If not, scrape off bead and apply fresh bead.

      Subfloors: Conventional or tongue and groove: Lay one 1/4" (.64 cm) zigzag adhesive bead on each joist. On supporting joists where sheets meet, lay two zigzag beads for added strength and to prevent squeaking. Space joints the thickness of a putty knife to allow for expansion. Nail section into place with 8d annular or spiral nails 12" (30 cm) on center of all joists. Subfloor must be under roof within 6 weeks of construction. Proper installation methods for subflooring must be followed.

      Decks: Use a 1/4" (.64 cm) bead on every joist for added strength and to prevent squeaking. Nail planks at every other joist; pre-drill nail holes to prevent splitting of wood.

      CLEAN-UP
      Use mineral spirits or an adhesive remover.

 

LIQUID NAILS® Subfloor & Deck Construction Adhesive Application Photos

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Subfloor & Deck Construction Adhesive Specs

  • Specification 1

    • RECOMMENDED FOR increasing the structural integrity of wall, deck and subfloor systems using the following common building materials:

      • Lumber and treated lumber
      • Plywood
      • Waferboard
      • Engineered lumber
      • Particleboard
      • OSB

      NOT RECOMMENDED FOR uses other than subfloor, deck and wall system installation, or underlayment directly to concrete without proper vapor barrier and fasteners.

    • TECHNICAL INFORMATION

      Base: Synthetic rubber & resin
      Type: Solvent elastomeric adhesive
      Color: Light Tan
      Appearance: Smooth paste
      Application Temperature: 10°to 100°F (-12°to 38°C)
      Service Temperature: -20°to 140°F (-29°to 60°C)
      Adhesion: Excellent to most common
      building materials
      Consistency: Non-sag under normal use
      Bridging Ability: Excellent, bridges gaps
      to 3/8" (1 cm)
      Extrudability: Very easy to gun at room temperature
      Shear Strength: 24 hours – 200 psi
      48 hours – 300 psi
      28 days – exceeds 450 psi
      Durability: Very good; estimated to exceed 40 years
      Flexibility: Excellent
      Water Resistance: Very good
      Exterior Weathering: Very good; not
      recommended for direct exposure to sunlight
      Aging: Excellent after accelerated aging cycle
      Freeze-Thaw-Stable: Does not freeze
      Bleed: None
      Staining: None
      Odor: Mild toluene
      Working Time: Adhere within 15 minutes
      Drying Time: Full cure in two weeks
      Paintability: Paintable with oil and
      latex based paints
      Weight Per Gallon: 9.5 pounds (1.13 kg/l)
      Viscosity: 210,000 CPS
      Volatiles: 34%
      Solids: 66%
      Flammability: Extremely flammable;
      nonflammable when dry
      Flash Point: 1°F (-17°C)
      Coverage:
      30 lineal ft. using 1/4" bead for 10 fl.oz.;
      85 lineal ft. using 1/4" bead for 28 fl.oz.
      Shelf Life: 12 months from date of purchase
      Specifications: Exceeds ASTM AFG-01
      & ASTM-D-3498
      MAX VOC: 384 GPL

 

Easy2 Technologies