Schiller Grounds Care, Inc. - BOB-CAT ProCat DX Zero Turn Mowers Product Demo
BOB-CAT ProCat DX Zero Turn Mowers Performance
View 1
- Fully Dampened Operator Controls:
Smoother operation: forward and reverse control with spring-assist return to neutral from reverse.
- Larger Control Levers and Thicker Grips:
For more comfort and less vibration
- 4-Point Adjustable Decks:
For precision cutting height setting and overall deck leveling. Adjustable deck pitch for mulching, side discharge and collection.
- Quick Lift Foot Assist Pedal:
Raises / lowers deck quickly without locking into transport position, for continuous cutting without interruption.
- Fully Dampened Operator Controls:
View 2
- Vertical Shaft Engines with Lower Center of Gravity:
Vertical shaft engines provide a simplified deck drive and better belt drive efficiency.
- Hydro-Gear Pumps and Parker Wheel Motors:
Dual 10 cc pumps for speeds up to 8.5 mph.
- Polyester Based Powder Coat Paint:
Baked on enamel bonds to metal components for long life; resists scratches on frame and deck components.
- Vertical Shaft Engines with Lower Center of Gravity:
View 3
- Robot Welded Components:
Precision welded for stronger components.
- DuraDeck with Extreme Discharge System:
Formed and welded 10-gauge steel with 7-gauge side skirts, double-plated reinforced cutterdeck, reinforced leading edge design. Strengthens deck in adverse mowing conditions such as along curbs and walls.
- Molded Rubber Discharge Chute:
Bounces back from hard knocks and folds up for storage; no need to remove it.
- Robot Welded Components:
View 4
- Fully Adjustable Anti-scalp Rollers:
Strategically placed to deliver a superior cut on undulating turf. 52" deck models have 6 sets of anti-scalp rollers with heavy-duty 3-gauge brackets. 61" deck models have 7 sets.
- Fully Adjustable Anti-scalp Rollers:
BOB-CAT ProCat DX Zero Turn Mowers Maintenance
View 1
- Low Maintenance Caster Wheels:
Sealed bearing caster wheel with trash guard.
- Low Maintenance Caster Wheels:
View 2
- Deep Sheave Split Steel Spindle Pulleys:
Split steel for strength and durability. Deep sheave machined pulleys require no belt guides to adjust!
- Deep Sheave Split Steel Spindle Pulleys:
View 3
- Easy Service Access:
For service, simply lift up the floor plate and flip the seat over.
- Easy Service Access:
View 4
- Replaceable Caster Supports:
Modular frame design provides replaceable caster supports and components.
- Replaceable Caster Supports:
BOB-CAT ProCat DX Zero Turn Mowers Gallery
BOB-CAT ProCat DX Zero Turn Mowers Models
| 52" Deck | 61" Deck | |
|---|---|---|
| Power Options | 19-HP Kawasaki KAI V-Twin OHV Dual Element Air Filter | 26-HP Briggs & Stratton ELS V-Twin OHV Ducted Dual Element Air Filter |
BOB-CAT ProCat DX Zero Turn Mowers Specs
Specification 1
942218E
Specification 2
Model
Horsepower (@ 3,600 rpm)
Ignition
Kawasaki 675cc V-twin, overhead valve, gas
19 (14.2 kW)
Electronic, electric start
Specification 3
942219E
Specification 4
Model
Horsepower (@ 3,600 rpm)
Ignition
26-HP Briggs & Stratton ELS V-Twin OHV
26 (19.3 kW)
Electronic, electric start
Specification 5
Vehicle
Specification 6
Fuel Capacity
Transmission
Drive
Hydraulic Capacity
Brakes
Steering
Seat
Gauges and Controls
Speed
Turning Radius
Frame12 gal. (36 l)
Hydrostatic drive with dual 10cc variable displacement pumps; wheel motors
Belt from engine to hydrostat input shafts; hydrostatic drive to wheels
.65 gal. (2.5 L) capacity; oil cooler
Hydro provides dynamic braking; drum type parking brakes
Lever-type steering controls independent power to each wheel for moving, stopping, and turning
High-back, vinyl-covered, foam-padded with armrests, fore-aft adjustment
Hourmeter; neutral safety switches, throttle; choke; key switch; PTO clutch switch; steering and traction control arms; parking brake lever
0 - 8.5 mph (13 km/h) forward; 0 - 6 mph (9 km/h) reverse
True zero-turning radius
Formed and welded steel frame
Specification 7
Tires
Specification 8
Front Casters
52"
61"
Rear Drive
52" Deck
61" Deck
(2) 13 x 5.00-6, 4-ply rated, tubeless
(2) 13 x 6.50-5, 4-ply rated, tubeless
(2) 23 x 8.50-12, 4-ply rated, tubeless
(2) 23 x 10.50-12, 4-ply rated, tubeless
Specification 9
Cutting Decks
Specification 10
Cutting Width and Type
Deck Construction
Spindles
Drive
Anti-Scalp Rollers
52 in. Decks
61 in. Decks
Productivity Rate / 8 Hours
52 in. Deck
61 in. Deck
Height of Cut
Blades (3)
52 in. Deck
61 in. Deck52 in. (1.33m) side discharge
61 in. (1.5m) side discharge
DuraDeck™ with Extreme Discharge System. Welded 10-gauge steel with 7-gauge reinforcements and side skirts, molded rubber discharge chute.
Large diameter 6 bolt top-mounted, 1 in. (25 mm) dia. shaft on precision ground maintenance-free ball bearings
Belt from engine to center spindle; reinforced V-belt on split steel pulleys from center spindle to outboard spindles, 5.5 in. (140 mm) with replaceable idler arm bold
(6) 5 in. (127 mm), front and rear center, left and right front, left and right rear
(7) 5 in. (127 mm), (2) front center, left and right front, left and right rear, center rear
Up to 27.1 acres at 8 mph (12.8 km / h)
Up to 31.5 acres at 8 mph (12.8 km/h)
1.5 in. to 4.5 in. (38 mm to 114 mm) in .25 in. (6.4 mm) increments
18 in. (46 cm); .205 in. (5.2 mm) thick
21 in. (53 cm); .25 in. (6.4 mm) thick
Specification 11
Dimensions
Specification 12
Length
Width
52 in. Deck
61 in. Deck
Overall Height80 in. (2.03 m)
64.5 in. (1.6 m) with chute down; 58.25 in. (1.4 m) with chute up
73 in. (1.9 m) with chute down; 62 in. (1.6 m) with chute up
46.5 in. (1.2 m)
Specification 13
Accessories
- 2-post folding Roll Over Protection Structure (ROPS) with seat belt
- Tire - Knobby 23 x 10.50 -12 (2 required)
- 52" or 61" Deck striping kit
- 52" or 61" Mulch baffle kit
- Kit - 61" Widetrack (widens track on 61" units)
- Kit - Mulching 52" or 61" deck
- Kit - ECO plate
- Electric deck lift kit
- ZT Hitch kit
- BOSS-VAC PRO™ Collection System
