Loading

KitchenAid - Beater to Bowl Adjustment on Tilt-Head Design Mixer Product Demo

Beater to Bowl Adjustment on Tilt-Head Design Mixer Full Length Video

See Flash demo for product images and multimedia.

 

Beater to Bowl Adjustment on Tilt-Head Design Mixer Video Scene Selector

  • Introduction

    Select one of the following steps by clicking on the numbered tabs to the right:

    1:  Introduction

    2:  Gather your tools

    3:  Making the Adjustment

    4:  Proper Clearance

    5:  Closing

    This Step:

    1:  Introduction - Beater to Bowl Adjustment on the Tilt-Head Design Mixer

  • Gather Your Tools

    Select one of the following steps by clicking on the numbered tabs to the right:

    1: Introduction

    2: Gather your tools

    3: Making the Adjustment

    4: Proper Clearance

    5: Closing

    This Step: 

    Locate your Flat Beater, a dime and a flat head screw driver. 

    These tools will be required to make the adjustment on your Tilt-Head Mixer. 

    You will notice here the dime is not being moved as the Flat Beater rotates in the bowl.  This indicates the Flat Beater is not properly adjusted. 

     

  • Making Your Adjustment

    Select one of the following steps by clicking on the numbered tabs to the right:

    1: Introduction

    2: Gather your tools

    3: Making the Adjustment

    4: Proper Clearance

    5: Outro

    This Step: 

    Your Tilt-Head Stand Mixer's "Beater to Bowl" clearance can easily be adjusted by following the steps below:

    Unplug your Mixer

    Tilt the head of your Mixer back and locate the screw in the hinge area as shown to the right. 

    Turn the screw about a quarter turn counter clockwise to raise the Flat Beater. 

    Turn the screw about a quarter turn clockwise to lower the Flat Beater. 

     

     

     

  • Proper Clearance

    Select one of the following steps by clicking on the numbered tabs to the right:

    1: Introduction

    2: Gather your tools

    3: Making the Adjustment

    4: Proper Clearance 

    5: Closing

    This Step:

    Once you have made your adjustment replace the dime into the bowl.

    With your Flat Beater on your mixer put the Mixer-Head into the down position. 

    Turn the Mixer on to the "Stir Position".

    When properly adjusted, the Flat Beater will gently nudge the dime around the bottom of the bowl. 

  • Closing

    Select one of the following steps by clicking on the numbered tabs to the right:

    1: Introduction

    2: Gather your tools

    3: Making the Adjustment

    4: Proper Clearance

    5: Closing

 

Easy2 Technologies