Loading

Liquid Nails - LIQUID NAILS® Heavy Duty Construction Adhesive Product Demo

LIQUID NAILS® Heavy Duty Construction Adhesive Intro

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Heavy Duty Construction Adhesive Features

  • View 1

    • Waterproof:

      Weatherproof bond will outlast project.

    • Exceptional Holding Power:

      Develops tack fast, reducing the need for bracing.

    • Bonds Heaviest Materials:
      • Brick
      • Wood
      • Metal
    • Durable and Flexible:

      Long lasting, impact-resistant bond.

    • Extreme Weather Formulation:

      Good for year round use.

 

LIQUID NAILS® Heavy Duty Construction Adhesive Video

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Heavy Duty Construction Adhesive Application Tips

  • Specification 1

    • Surface Preparation:
      Surfaces must be clean, dry and structurally sound.

      Product Application:
      Cut nozzle at a 45° angle to desired size. Puncture inner seal with nail or wire and continue as directed below.

      Cabinets and countertops:
      Apply a 1/4" bead to contact areas on the back of cabinets or counter tops. Press firmly into place. Mechanical fasteners must also be used for installing wall cabinets.

      Materials to furring strips or studs:
      Apply zigzag 1/4" bead to each strip or stud to be covered by panel. Position panel so edges meet at stud center; only severely warped materials require finishing nails at top and bottom.

      Decks:
      Apply zigzag 1/4" bead to joists. Position planks and secure with mechanical fasteners.

      Clean-up:
      Use mineral spirits or an adhesive remover.

 

LIQUID NAILS® Heavy Duty Construction Adhesive Application Photos

See Flash demo for product images and multimedia.

 

LIQUID NAILS® Heavy Duty Construction Adhesive Specs

  • Specification 1

    • Recommended For:
      Bonding common building materials (concrete, lumber, etc.) to:

      • Plywood and waferboard
      • Drywall
      • Tileboard
      • Treated Lumber
      • Brick Veneers
      • Exterior Foamboard (when applied below 90°F)
  • Specification 2

    • Technical Information:

      Base: Synthetic rubber & resin
      Type: Solvent
      Color: Tan
      Appearance: Smooth
      Application Temperature:  40° to 100° F (5° to 38° C)
      Service Temperature:  -20° to 140° F (-29° to 60° C)
      Adhesion:  Excellent
      Consistency:  Short buttery
      Bridging Ability:  Excellent
      Extrudability:  Easy
      Shear Strength:
      • 24 hours – 225 psi
      • 48 hours – 300 psi
      • 7 days – >425 psi
      Durability:  Excellent; 20 year life
      Flexibility:  Excellent
      Water Resistance: Excellent
      Exterior Weathering: Very good; adhesive not recommended for direct exposure to sunlight
      Staining:  May stain marble
      Odor: Mild solvent
      Working Time:  10 minutes
      Weight Per Gallon: 9.4 pounds (1.12 kg/l)
      Viscosity:  230,000 CPS
      Volatiles:  35%
      Solids:  65%
      Flammability:   Extremely flammable; nonflammable when dry
      Flash Point:  1°F (-17°C)
      Coverage:
      • 30 lineal ft. using 1/4" bead for 10 fl.oz.;
      • 85 lineal ft. using 1/4" bead for 28 fl.oz.
      Shelf Life: 12 months from date of purchase
      Specifications:  Exceeds ASTM C-557
      MAX VOC:  401 GPL

 

Easy2 Technologies