To drive high pump performance and for long life
*Tested per ISO1217
With extremely low oil consumption to assure long, trouble-free operation
Allows start/stop or constant run operation
For balanced, puncture resistant job site mobility
Delivers the surge air power and recovery needed to run extra nailers over standard 8 gallon (30.2L)
*Tested per ISO1217
Allows for quick and easy belt adjustments
For ease of mobility on the jobsite
Allows for quick and thorough tank draining
Provide protection to key compressor components
Allows the pump to run more efficiently and produce higher SCFM
Provides several lift points and tie down points
D55394
Horsepower (HP)Continuous*: 4
Control: Dual
Drive: Belt
Tank (Gallon/Liter): 10.5 /39.7
Power Supply: 2 Pole Induction Motor, 240V
SCFM @ 100 PSI*: 10.5
Framers Recommended: 4-7
Roofers Recommended: 6-8
Pump Speed (RPM): 1,050
Tool Length: 43.45"
Tool Width: 24.16"
Tool Height: 22.31"
Tool Weight: 180 lbs
*Tested per ISO1217
† Gross horsepower (HP). This horsepower rating represents the maximum output under laboratory conditions at 3,600 RPM in accordance with SAE (Society of Automotive Engineers) J1995 and should be used for comparison purposes only. Actual engine output will be lower and will vary depending on the application, speed, and other variables including altitude and temperature