Loading

Custom DV - Mirr.Edge™ Product Demo

Mirr.Edge™ Intro

See Flash demo for product images and multimedia.

 

Mirr.Edge™ Features

  • View 1

    • Acrylic Mirror Finish: Beautify and enhance your bathroom area with a decor matching frame for your existing mirror.
    • Save Time & Money: Mirr.Edge is easy to install and will save you the cost of replacing your existing mirror. The only tools needed are a razor knife and a measuring tape.
  • View 2

    • Woodgrain Finish: In minutes you can dramatically change the look of your mirror with a choice of four different woodgrain finishes that are available with matching Contemporary or Decorative Corner Plates.
    • Easily Customize to Any Size: Mirr.Edge Strips are available in 36" and 60" lengths. For mirrors larger than 60", use Mirr.Edge Seam Plates to cover the strips where they meet to achieve additional length.
    • Eliminates Need For Mitering: No need to miter the Mirr.Edge Framing System because the corner plates forgive any irregular cuts and completes the installation.

 

Mirr.Edge™ Before & After

See Flash demo for product images and multimedia.

 

Mirr.Edge™ Commercial

See Flash demo for product images and multimedia.

 

Mirr.Edge™ Installation

  • Step 1: Measure your mirror height and width.
  • Step 2: Score a line on the face of the strip that has been measured to the desired length.
  • Step 3: Hold the strip firmly with both hands near the score line and crisply bend your hands down to snap the strip.
  • Step 4:
    • Affix the adhesive pads and apply small dabs of glue to the back of the strips, approx. 8" to 10” apart, then apply adhesive pads and glue to the back of the corner and cover plates if used.

    • Place the vertical strips first, then the horizontal strips around the perimeter of the mirror.

    • Complete the corner areas by affixing the corner plates on top of the strips where the vertical and horizontal strips meet in each corner. Now stand back and admire the dramatic transformation of your mirror!

 

Mirr.Edge™ Specs

The Acrylic category includes:
  • 1.5” x 36" Strips (two strips per package)
  • 1.5” x 60" Strips (two strips per package)
  • Seam Cover Plates (two plates per package)
  • Corner Plates (four plates per package)

*Film face protection supplied on all acrylic product

The Woodgrain Finish category Includes:
  • 1.5” x 36" Strips (two strips per package)
  • 1.5” x 60" Strips (two strips per package)
  • Seam Cover Plates (two plates per package)
  • Contemporary Corner Plates (four plates per package)
  • Decorative Corner Plates (four plates per package)

*Packages Sold Separately
*Double Faced Adhesive Pads Supplied In Each Package
*Installation Instructions Supplied In Each Package Of Strips

 

Easy2 Technologies